Hi Prafulla, You mean file names should be like uad_u2h.c or armd_u2h.c?
Thanks again. Regards, Ajay Bhargav ----- Original Message ----- From: "Prafulla Wadaskar" <prafu...@marvell.com> To: "Ajay Bhargav" <ajay.bhar...@einfochips.com> Cc: u-boot@lists.denx.de, "Ashish Karkare" <akark...@marvell.com>, "Prabhanjan Sarnaik" <sarn...@marvell.com> Sent: Friday, July 8, 2011 8:56:53 PM Subject: RE: [PATCH 4/4] Armada100: Adds support for USB on gplugD > -----Original Message----- > From: Ajay Bhargav [mailto:ajay.bhar...@einfochips.com] > Sent: Friday, July 08, 2011 11:53 AM > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de; Ajay Bhargav > Subject: [PATCH 4/4] Armada100: Adds support for USB on gplugD > > Signed-off-by: Ajay Bhargav <ajay.bhar...@einfochips.com> > --- > arch/arm/cpu/arm926ejs/armada100/Makefile | 1 + > arch/arm/cpu/arm926ejs/armada100/cpu.c | 14 ++ > arch/arm/cpu/arm926ejs/armada100/pxa168_u2h.c | 154 > ++++++++++++++++++++ > arch/arm/include/asm/arch-armada100/cpu.h | 31 ++++ > .../include/asm/arch-armada100/pxa168_usb_phy.h | 115 > +++++++++++++++ > drivers/usb/host/Makefile | 1 + > drivers/usb/host/ehci-pxa168.c | 58 ++++++++ The file name should be mv_ehci.c > include/configs/gplugd.h | 20 +++ > 8 files changed, 394 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/cpu/arm926ejs/armada100/pxa168_u2h.c > create mode 100644 arch/arm/include/asm/arch-armada100/pxa168_usb_phy.h > create mode 100644 drivers/usb/host/ehci-pxa168.c No pxa reference in the code, replace them by ARMD, armada100, ARMADA100 Split the patch as UAB echi driver support for armada followed by enabling it for your board. Regards.. Prafulla .. -- This message has been scanned for viruses and dangerous content by Clean Mail Gateway, and is believed to be clean. ************************************************************************************************************************************************************* einfochips Business Disclaimer : This e-mail message and all attachments transmitted with it are intended solely for the use of the addressee and may contain legally privileged and confidential information. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately by replying to this message and please delete it from your computer. Any views expressed in this message are those of the individual sender unless otherwise stated. Company has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. ************************************************************************************************************************************************************* _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
