Am 10.07.2011 14:37, schrieb Albert ARIBAUD:
Hi Jens,
Le 10/07/2011 11:14, Jens Scharsig a écrit :
* add USB host support to eb_cpux9k2 board
Signed-off-by: Jens Scharsig<js_at...@scharsoft.de>
---
include/configs/eb_cpux9k2.h | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
This fails to apply properly on current u-boot/master or
u-boot-arm/master or u-boot-atmel/master. Which repository/branch is it
supposed to be applied to?
The patch is correct but anything between me an you/list modifies the mails.
There are additional spaces in my file.
Until I found why the mta's adds. I have attache the patch as file.
Best regards
Jens Scharsig
>From c8a45565b06cceb831ec4478e9d54edbf6505869 Mon Sep 17 00:00:00 2001
From: Jens Scharsig <js_at...@scharsoft.de>
Date: Sun, 10 Jul 2011 20:28:27 +0200
Subject: [PATCH] * add USB host support to eb_cpux9k2 board
Cc: e...@bus-elektronik.de
Signed-off-by: Jens Scharsig <js_at...@scharsoft.de>
---
include/configs/eb_cpux9k2.h | 14 ++++++++++++++
1 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index c4b1e65..b1fcec7 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -137,6 +137,8 @@
#define CONFIG_CMD_PING
#define CONFIG_I2C_CMD_NO_FLAT
#define CONFIG_I2C_CMD_TREE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
#define CONFIG_SYS_LONGHELP
@@ -167,6 +169,18 @@
/*
* Hardware drivers
*/
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_AT91C_PQFP_UHPBUG
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_EFI_PARTITION
+
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
/*
* UART/CONSOLE
--
1.7.3.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
