Commit c37a6684818d ("stm32mp: fix compilation issue with DEBUG_UART")
split the debug UART initialization code into two files, but failed to
update other non-ST boards. This did not lead to noticeable breakage
until debug UART is enabled, which is not the default. Update the
Makefile accordingly to allow debug UART to work.
Fixes: c37a6684818d ("stm32mp: fix compilation issue with DEBUG_UART")
Signed-off-by: Marek Vasut <[email protected]>
---
Cc: Patrice Chotard <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
board/dhelectronics/dh_stm32mp1/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/dhelectronics/dh_stm32mp1/Makefile
b/board/dhelectronics/dh_stm32mp1/Makefile
index 2f4a301d1a0..429e01453bb 100644
--- a/board/dhelectronics/dh_stm32mp1/Makefile
+++ b/board/dhelectronics/dh_stm32mp1/Makefile
@@ -3,6 +3,8 @@
# Copyright (C) 2018, STMicroelectronics - All Rights Reserved
#
+obj-$(CONFIG_DEBUG_UART_BOARD_INIT) += ../../st/stm32mp1/debug_uart.o
+
obj-$(CONFIG_PMIC_STPMIC1) += ../../st/common/stpmic1.o
obj-y += board.o
--
2.51.0
