This adds support for the Analog Devices SC589-EZKIT and SC589-mini.
Signed-off-by: Vasileios Bimpikas <[email protected]>
Signed-off-by: Utsav Agarwal <[email protected]>
Signed-off-by: Arturs Artamonovs <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Caleb Ethridge <[email protected]>
Signed-off-by: Philip Molloy <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
---
Changes in v2:
- GPIO names and polarities adjusted to match logical usage
arch/arm/dts/sc589-ezkit.dts | 198 ++++++++++++++++++++++++++
arch/arm/dts/sc589-mini.dts | 18 ++-
arch/arm/dts/sc58x.dtsi | 164 ++++++++++++++++++++-
board/adi/sc589-ezkit/Makefile | 6 +
board/adi/sc589-ezkit/sc589-ezkit.c | 21 +++
board/adi/sc589-ezkit/sc589-ezkit.env | 17 ++-
board/adi/sc589-mini/Makefile | 6 +
board/adi/sc589-mini/sc589-mini.c | 21 +++
board/adi/sc589-mini/sc589-mini.env | 17 ++-
configs/sc589-ezkit_defconfig | 101 +++++++++++++
configs/sc589-mini_defconfig | 97 +++++++++++++
11 files changed, 650 insertions(+), 16 deletions(-)
create mode 100644 board/adi/sc589-ezkit/Makefile
create mode 100644 board/adi/sc589-ezkit/sc589-ezkit.c
create mode 100644 board/adi/sc589-mini/Makefile
create mode 100644 board/adi/sc589-mini/sc589-mini.c
create mode 100644 configs/sc589-ezkit_defconfig
create mode 100644 configs/sc589-mini_defconfig
diff --git a/arch/arm/dts/sc589-ezkit.dts b/arch/arm/dts/sc589-ezkit.dts
index 8a1c0ce0862..4b3a6368332 100644
--- a/arch/arm/dts/sc589-ezkit.dts
+++ b/arch/arm/dts/sc589-ezkit.dts
@@ -8,6 +8,204 @@
#include "sc58x.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "ADI SC589-EZKIT";
compatible = "adi,sc589-ezkit", "adi,sc58x";
};
+
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio_expander1: mcp23017@21 {
+ compatible = "microchip,mcp23017";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ bootph-pre-ram;
+
+ eeprom {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "eeprom-en";
+ bootph-pre-ram;
+ };
+
+ uart0-flow-en {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "uart0-flow-en";
+ bootph-pre-ram;
+ };
+
+ uart0-en {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "uart0-en";
+ bootph-pre-ram;
+ };
+
+ eth0 {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "eth0-en";
+ bootph-pre-ram;
+ };
+
+ eth1 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "eth1-en";
+ bootph-pre-ram;
+ };
+
+ mlb {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "~mlb-en";
+ bootph-pre-ram;
+ };
+
+ can0 {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "can0-en";
+ bootph-pre-ram;
+ };
+
+ can1 {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "can1-en";
+ bootph-pre-ram;
+ };
+
+ adau1962 {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "adau1962-en";
+ bootph-pre-ram;
+ };
+
+ adau1979 {
+ gpio-hog;
+ gpios = <9 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "adau1979-en";
+ bootph-pre-ram;
+ };
+
+ sd_wp {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "sd-wp-en";
+ bootph-pre-ram;
+ };
+
+ spi2d2-d3 {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "spi2d2-d3-en";
+ bootph-pre-ram;
+ };
+
+ spi2flash-cs {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "spi2flash-cs";
+ bootph-pre-ram;
+ };
+
+ spdif-opt {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "spdif-optical-en";
+ bootph-pre-ram;
+ };
+
+ spdif-dig {
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "spdif-digital-en";
+ bootph-pre-ram;
+ };
+ };
+
+ gpio_expander2: mcp23017@22 {
+ compatible = "microchip,mcp23017";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ bootph-pre-ram;
+
+ pushbutton1 {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "pushbutton1-en";
+ bootph-pre-ram;
+ };
+
+ pushbutton2 {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "pushbutton2-en";
+ bootph-pre-ram;
+ };
+
+ led10 {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "led10-en";
+ bootph-pre-ram;
+ };
+
+ led11 {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "led11-en";
+ bootph-pre-ram;
+ };
+
+ led12 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "led12-en";
+ bootph-pre-ram;
+ };
+ };
+};
+
+ð0 {
+ snps,reset-gpio = <&gpio0 ADI_ADSP_PIN('B', 14) GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+ emac0_phy_pwdn {
+ gpio-hog;
+ output-high;
+ gpios = <ADI_ADSP_PIN('C', 15) GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mmc {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sc589-mini.dts b/arch/arm/dts/sc589-mini.dts
index 605f7a17bfc..a7650bae12c 100644
--- a/arch/arm/dts/sc589-mini.dts
+++ b/arch/arm/dts/sc589-mini.dts
@@ -8,6 +8,22 @@
#include "sc58x.dtsi"
/ {
- model = "ADI SC598-MINI";
+ model = "ADI SC589-MINI";
compatible = "adi,sc589-mini", "adi,sc58x";
};
+
+ð0 {
+ snps,reset-gpio = <&gpio0 ADI_ADSP_PIN('B', 7) GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+ emac0_phy_pwdn {
+ gpio-hog;
+ output-high;
+ gpios = <ADI_ADSP_PIN('F', 6) GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mmc {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sc58x.dtsi b/arch/arm/dts/sc58x.dtsi
index 66145315ab7..7b07589de47 100644
--- a/arch/arm/dts/sc58x.dtsi
+++ b/arch/arm/dts/sc58x.dtsi
@@ -6,18 +6,176 @@
#include "sc5xx.dtsi"
/ {
- gic: interrupt-controller@310b2000 {
- compatible = "arm,cortex-a5-gic";
+ gic: interrupt-controller@310B2000 {
+ compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x310B2000 0x1000>,
<0x310B4000 0x100>;
};
+
+ soc {
+ rcu: rcu@0x3108B000 {
+ compatible = "adi,reset-controller";
+ reg = <0x3108B000 0x1000>;
+ adi,sharc-min = <1>;
+ adi,sharc-max = <2>;
+ adi,enable-reboot;
+ status = "disabled";
+ };
+
+ mmc: mmc0@31010000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x31010000 0x400>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_default>;
+ bus-width = <4>;
+ fifo-depth = <128>;
+ clock-names = "biu", "ciu";
+ max-frequency = <52000000>;
+ status = "disabled";
+ };
+
+ usb0: musb@310c1000 {
+ compatible = "adi,sc5xx-musb";
+ reg = <0x310c1000 0x390>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133
IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc", "dma";
+ status = "okay";
+ };
+
+ usb1: musb@310c2000 {
+ compatible = "adi,sc5xx-musb";
+ reg = <0x310c2000 0x390>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135
IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc", "dma";
+ status = "disabled";
+ };
+
+ sharc1: sharc@0x28240000 {
+ compatible = "adi,sc5xx-rproc";
+ reg = <0x28240000 0x100>;
+ coreid = <1>;
+ adi,rcu = <&rcu>;
+ status = "disabled";
+ };
+
+ sharc2: sharc@0x28a40000 {
+ compatible = "adi,sc5xx-rproc";
+ reg = <0x28a40000 0x100>;
+ coreid = <2>;
+ adi,rcu = <&rcu>;
+ status = "disabled";
+ };
+ };
};
&timer0 {
reg = <0x31001004 0x100>,
- <0x31001060 0x100>;
+ <0x31001060 0x100>;
+ clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
+};
+
+&pinctrl0 {
+ mmc_default: mmc_pins {
+ bootph-pre-ram;
+ adi,pins = <ADI_ADSP_PIN('F', 2) ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('F', 3)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('F', 4)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('F', 5)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('F', 10)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('F', 11)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('F', 12)
ADI_ADSP_PINFUNC_ALT0>;
+ };
+
+ eth0_default: eth0_pins {
+ adi,pins = <ADI_ADSP_PIN('A', 0) ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 1)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 2)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 3)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 4)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 5)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 6)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 7)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 8)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 9)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 10)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 11)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 12)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('A', 13)
ADI_ADSP_PINFUNC_ALT0>;
+ };
+
+ uart0_default: uart0_pins {
+ bootph-pre-ram;
+ adi,pins = <ADI_ADSP_PIN('C', 13) ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('C', 14)
ADI_ADSP_PINFUNC_ALT0>;
+ };
+
+ spi2_default: spi2_pins {
+ adi,pins = <ADI_ADSP_PIN('C', 1) ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('C', 2)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('C', 3)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('C', 4)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('C', 5)
ADI_ADSP_PINFUNC_ALT0>,
+ <ADI_ADSP_PIN('C', 6)
ADI_ADSP_PINFUNC_ALT0>;
+ };
+};
+
+&pinctrl0 {
+ adi,npins = <102>;
+};
+
+&gpio0 {
+ adi,ngpios = <102>;
+};
+
+&clk {
+ compatible = "adi,sc58x-clocks";
+};
+
+&uart0 {
+ clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
+};
+
+&spi2 {
+ clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK1>;
+ reg = <0x31044000 0x1000>;
+
+ flash1: is25lp512@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor", "is25lp512";
+ reg = <1>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <10000000>;
+ bootph-pre-ram;
+ };
+};
+
+&wdog {
+ clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
+};
+
+ð0 {
+ reg = <0x3100C000 0x1000>;
+};
+
+&mmc {
+ clocks = <&dummy>, <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
+};
+
+&i2c0 {
+ clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
+};
+
+&i2c1 {
+ clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
+};
+
+&i2c2 {
clocks = <&clk ADSP_SC58X_CLK_CGU0_SCLK0>;
};
diff --git a/board/adi/sc589-ezkit/Makefile b/board/adi/sc589-ezkit/Makefile
new file mode 100644
index 00000000000..0450aa373bd
--- /dev/null
+++ b/board/adi/sc589-ezkit/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2025 - Analog Devices, Inc.
+#
+
+obj-y := sc589-ezkit.o
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.c
b/board/adi/sc589-ezkit/sc589-ezkit.c
new file mode 100644
index 00000000000..288c2670761
--- /dev/null
+++ b/board/adi/sc589-ezkit/sc589-ezkit.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2025 - Analog Devices, Inc.
+ */
+
+#include <phy.h>
+#include <asm/u-boot.h>
+#include <asm/arch-adi/sc5xx/sc5xx.h>
+#include <asm/arch-adi/sc5xx/soc.h>
+
+int board_phy_config(struct phy_device *phydev)
+{
+ fixup_dp83867_phy(phydev);
+ return 0;
+}
+
+int board_init(void)
+{
+ sc5xx_enable_rgmii();
+ return 0;
+}
diff --git a/board/adi/sc589-ezkit/sc589-ezkit.env
b/board/adi/sc589-ezkit/sc589-ezkit.env
index 34b924992ac..3705bbd5b4d 100644
--- a/board/adi/sc589-ezkit/sc589-ezkit.env
+++ b/board/adi/sc589-ezkit/sc589-ezkit.env
@@ -4,10 +4,15 @@
* (C) Copyright 2024 - Analog Devices, Inc.
*/
-#include <env/adi/adi_boot.env>
-
-adi_stage2_offset=0x20000
-adi_image_offset=0xE0000
-adi_rfs_offset=0x6E0000
-loadaddr=0xC3000000
+adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
+adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
+adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-ezkit.jffs2
+loadaddr=CONFIG_SC5XX_LOADADDR
+
+#define USE_NFS
+#define USE_RAM
+#define USE_MMC
+#define USE_SPI
+
+#include <env/adi/adi_boot.env>
diff --git a/board/adi/sc589-mini/Makefile b/board/adi/sc589-mini/Makefile
new file mode 100644
index 00000000000..b2712e8e488
--- /dev/null
+++ b/board/adi/sc589-mini/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# (C) Copyright 2025 - Analog Devices, Inc.
+#
+
+obj-y := sc589-mini.o
diff --git a/board/adi/sc589-mini/sc589-mini.c
b/board/adi/sc589-mini/sc589-mini.c
new file mode 100644
index 00000000000..288c2670761
--- /dev/null
+++ b/board/adi/sc589-mini/sc589-mini.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2025 - Analog Devices, Inc.
+ */
+
+#include <phy.h>
+#include <asm/u-boot.h>
+#include <asm/arch-adi/sc5xx/sc5xx.h>
+#include <asm/arch-adi/sc5xx/soc.h>
+
+int board_phy_config(struct phy_device *phydev)
+{
+ fixup_dp83867_phy(phydev);
+ return 0;
+}
+
+int board_init(void)
+{
+ sc5xx_enable_rgmii();
+ return 0;
+}
diff --git a/board/adi/sc589-mini/sc589-mini.env
b/board/adi/sc589-mini/sc589-mini.env
index 0f3f0bd28e9..6cd251746b0 100644
--- a/board/adi/sc589-mini/sc589-mini.env
+++ b/board/adi/sc589-mini/sc589-mini.env
@@ -4,10 +4,15 @@
* (C) Copyright 2024 - Analog Devices, Inc.
*/
-#include <env/adi/adi_boot.env>
-
-adi_stage2_offset=0x20000
-adi_image_offset=0xE0000
-adi_rfs_offset=0x8E0000
-loadaddr=0xC3000000
+adi_stage2_offset=CONFIG_SC5XX_UBOOT_OFFSET
+adi_image_offset=CONFIG_SC5XX_FITIMAGE_OFFSET
+adi_rfs_offset=CONFIG_SC5XX_ROOTFS_OFFSET
jffs2file=adsp-sc5xx-__stringify(CONFIG_ADI_IMAGE)-adsp-sc589-mini.jffs2
+loadaddr=CONFIG_SC5XX_LOADADDR
+
+#define USE_NFS
+#define USE_RAM
+#define USE_SPI
+#define USE_MMC
+
+#include <env/adi/adi_boot.env>
diff --git a/configs/sc589-ezkit_defconfig b/configs/sc589-ezkit_defconfig
new file mode 100644
index 00000000000..37f9199623e
--- /dev/null
+++ b/configs/sc589-ezkit_defconfig
@@ -0,0 +1,101 @@
+CONFIG_ARM=y
+CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
+CONFIG_ARCH_SC5XX=y
+CONFIG_SYS_MALLOC_LEN=0x100000
+CONFIG_SPL_GPIO=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xC203F000
+CONFIG_SF_DEFAULT_SPEED=1000000
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0xD0000
+CONFIG_ENV_SECT_SIZE=0x4000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK=0x200C0000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_BSS_START_ADDR=0x200A0000
+CONFIG_SPL_BSS_MAX_SIZE=0x8000
+CONFIG_SC58X=y
+CONFIG_TARGET_SC589_EZKIT=y
+CONFIG_SC5XX_UBOOT_OFFSET=0x20000
+CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
+CONFIG_SC5XX_ROOTFS_OFFSET=0x6E0000
+CONFIG_SC5XX_LOADADDR=0xC3000000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
+CONFIG_ADI_USE_DMC1=y
+CONFIG_CGU0_CLKOUTSEL=7
+# CONFIG_EFI_LOADER is not set
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run ramboot"
+CONFIG_SYS_CBSIZE=512
+CONFIG_CYCLIC_MAX_CPU_TIME_US=1000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_I2C=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_ELF is not set
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_PINMUX is not set
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SPI_MAX_HZ=10000000
+CONFIG_USE_HOSTNAME=y
+CONFIG_HOSTNAME="sc589-ezkit"
+CONFIG_NET_RETRY_COUNT=20
+CONFIG_IP_DEFRAG=y
+CONFIG_SPL_CLK=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_GPIO_HOG=y
+CONFIG_SPL_GPIO_HOG=y
+CONFIG_DM_GPIO_LOOKUP_LABEL=y
+CONFIG_SPL_DM_GPIO_LOOKUP_LABEL=y
+CONFIG_MCP230XX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_ADI=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_SNPS=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_DW_ALTDESCRIPTOR=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ADI_SPI3=y
+CONFIG_SPL_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_SC5XX=y
+CONFIG_USB_MUSB_PIO_ONLY=y
+CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
+# CONFIG_REGEX is not set
+# CONFIG_SPL_CRC8 is not set
diff --git a/configs/sc589-mini_defconfig b/configs/sc589-mini_defconfig
new file mode 100644
index 00000000000..c8dd28fa2da
--- /dev/null
+++ b/configs/sc589-mini_defconfig
@@ -0,0 +1,97 @@
+CONFIG_ARM=y
+CONFIG_SYS_ARM_CACHE_WRITETHROUGH=y
+CONFIG_ARCH_SC5XX=y
+CONFIG_SYS_MALLOC_LEN=0x100000
+CONFIG_SPL_GPIO=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xC203F000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0xD0000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK=0x200C0000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_BSS_START_ADDR=0x200A0000
+CONFIG_SPL_BSS_MAX_SIZE=0x8000
+CONFIG_SC58X=y
+CONFIG_TARGET_SC589_MINI=y
+CONFIG_SC5XX_UBOOT_OFFSET=0x20000
+CONFIG_SC5XX_FITIMAGE_OFFSET=0xE0000
+CONFIG_SC5XX_ROOTFS_OFFSET=0x8E0000
+CONFIG_SC5XX_LOADADDR=0xC3000000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
+CONFIG_ADI_USE_DMC1=y
+# CONFIG_EFI_LOADER is not set
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run ramboot"
+CONFIG_SYS_CBSIZE=512
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_I2C=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_ELF is not set
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_PINMUX is not set
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_MII=y
+# CONFIG_CMD_MDIO is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_EMBED=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_SPI_MAX_HZ=10000000
+CONFIG_USE_HOSTNAME=y
+CONFIG_HOSTNAME="sc589-mini"
+CONFIG_NET_RETRY_COUNT=20
+CONFIG_IP_DEFRAG=y
+CONFIG_SPL_CLK=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_GPIO_HOG=y
+CONFIG_SPL_GPIO_HOG=y
+CONFIG_DM_GPIO_LOOKUP_LABEL=y
+CONFIG_SPL_DM_GPIO_LOOKUP_LABEL=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_ADI=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_SNPS=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_DW_ALTDESCRIPTOR=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_ADI_SPI3=y
+CONFIG_SPL_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_SC5XX=y
+CONFIG_USB_MUSB_PIO_ONLY=y
+CONFIG_USB_STORAGE=y
+CONFIG_FAT_WRITE=y
+# CONFIG_REGEX is not set
--
2.49.1
