Hello Eugen, Am Tue, Nov 11, 2025 at 01:34:35PM +0200 schrieb Eugen Hristev: > > > On 11/11/25 13:26, Alexander Dahl wrote: > > Copied from linux kernel v6.18-rc4. Stripped attributes not supported > > by U-Boot drivers (dma, interrupt, fifo-size). > > Hello Alexander, > > Have you tried to configure the build to use upstream DTS ? this should > be available in the U-boot dir. CONFIG_OF_UPSTREAM I believe.
Quick try with _just_ enabling CONFIG_OF_UPSTREAM and adding the obligatory folder to CONFIG_DEFAULT_DEVICE_TREE leads to the expected build errors: DTC dts/upstream/src/arm/microchip/at91-sam9x60_curiosity.dtb Error: …/u-boot/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi:43.1-7 Label or path clk32 not found Error: …/u-boot/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi:51.1-9 Label or path main_rc not found Error: …/u-boot/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi:67.1-16 Label or path pinctrl_sdhci0 not found Error: …/u-boot/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi:79.1-9 Label or path pit64b0 not found Error: …/u-boot/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi:87.1-8 Label or path sdhci0 not found Error: …/u-boot/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi:91.1-13 Label or path slow_rc_osc not found FATAL ERROR: Syntax error parsing input tree Not bad for the first shot, but I guess at least the clock related issues might get challenging. However I need to put this aside for later. One question though, while we are at it: Would it be possible to define a custom dts in U-Boot and include an upstream .dtsi? Greets Alex > > Also, if you really want to update this u-boot DT, you would have to > copy it as-is, no stripping. Even if the props are unused. The only real > issue would be if Uboot stops working or gets confused by these extra props > > Eugen> > > Signed-off-by: Alexander Dahl <[email protected]> > > --- > > arch/arm/dts/sam9x60.dtsi | 10 ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi > > index a33c0d57398..1ee30422518 100644 > > --- a/arch/arm/dts/sam9x60.dtsi > > +++ b/arch/arm/dts/sam9x60.dtsi > > @@ -182,6 +182,16 @@ > > ranges = <0x0 0xf801c000 0x800>; > > status = "disabled"; > > > > + spi0: spi@400 { > > + compatible = "microchip,sam9x60-spi", > > "atmel,at91rm9200-spi"; > > + reg = <0x400 0x200>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; > > + clock-names = "spi_clk"; > > + status = "disabled"; > > + }; > > + > > i2c0: i2c@600 { > > compatible = "microchip,sam9x60-i2c"; > > reg = <0x600 0x200>; > -- Alexander Dahl Thorsis Technologies GmbH T +49 391 544 563 1000 Industrieautomation Oststr. 18 F +49 391 544 563 9099 T +49 391 544 563 3036 39114 Magdeburg https://www.thorsis.com/ Sitz der Gesellschaft: Magdeburg Amtsgericht Stendal HRB 30646 Geschäftsführer: Dipl.-Inf. Michael Huschke
