This patch adds creation of tifalcon.bin for the AM62a, 62p and 62x. The contents are the same as the existing tispl.bin but A53's SPL and the FDT have been removed as they are not needed in falcon boot.
This reduces boot time since the payload size is smaller compared to the regular tispl binary. tispl.bin = TFA + TEE + TIFS-STUB + A53 SPL + FDT tifalcon.bin = TFA + TEE + TIFS-STUB Signed-off-by: Anshul Dalal <[email protected]> --- arch/arm/dts/k3-am625-sk-binman.dtsi | 64 ++++++++++++++++++++++++++++ arch/arm/dts/k3-am62a-sk-binman.dtsi | 51 ++++++++++++++++++++++ arch/arm/dts/k3-am62p-sk-binman.dtsi | 51 ++++++++++++++++++++++ arch/arm/dts/k3-binman.dtsi | 54 +++++++++++++++++++++++ 4 files changed, 220 insertions(+) diff --git a/arch/arm/dts/k3-am625-sk-binman.dtsi b/arch/arm/dts/k3-am625-sk-binman.dtsi index f743c4353b4..42edb35fa7b 100644 --- a/arch/arm/dts/k3-am625-sk-binman.dtsi +++ b/arch/arm/dts/k3-am625-sk-binman.dtsi @@ -206,6 +206,70 @@ }; }; + ti-falcon { + insert-template = <&ti_falcon_template>; + + fit { + images { + tifsstub-hs { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-hs"; + load = <0x9dc00000>; + entry = <0x9dc00000>; + blob-ext { + filename = "tifsstub.bin_hs"; + }; + }; + tifsstub-fs { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-fs"; + load = <0x9dc00000>; + entry = <0x9dc00000>; + blob-ext { + filename = "tifsstub.bin_fs"; + }; + }; + tifsstub-gp { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-gp"; + load = <0x9dc00000>; + entry = <0x9dc00000>; + blob-ext { + filename = "tifsstub.bin_gp"; + }; + }; + dm { + ti-secure { + content = <&dm_falcon>; + keyfile = "custMpk.pem"; + }; + dm_falcon: ti-dm { + filename = "ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f"; + }; + }; + }; + + configurations { + default = "conf-0"; + conf-0 { + description = "k3-am625-sk-falcon"; + firmware = "atf"; + loadables = "tee", "tifsstub-hs", "tifsstub-fs", + "tifsstub-gp", "dm"; + }; + }; + }; + }; + ti-spl { insert-template = <&ti_spl_template>; diff --git a/arch/arm/dts/k3-am62a-sk-binman.dtsi b/arch/arm/dts/k3-am62a-sk-binman.dtsi index e3a2d155d51..cb9a56b8c37 100644 --- a/arch/arm/dts/k3-am62a-sk-binman.dtsi +++ b/arch/arm/dts/k3-am62a-sk-binman.dtsi @@ -144,6 +144,57 @@ }; + ti-falcon { + insert-template = <&ti_falcon_template>; + + fit { + images { + tifsstub-hs { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-hs"; + load = <0x9ca00000>; + entry = <0x9ca00000>; + blob-ext { + filename = "tifsstub.bin_hs"; + }; + }; + tifsstub-fs { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-fs"; + load = <0x9ca00000>; + entry = <0x9ca00000>; + blob-ext { + filename = "tifsstub.bin_fs"; + }; + }; + dm { + ti-secure { + content = <&dm_falcon>; + keyfile = "custMpk.pem"; + }; + dm_falcon: ti-dm { + filename = "ti-dm/am62axx/ipc_echo_testb_mcu1_0_release_strip.xer5f"; + }; + }; + }; + + configurations { + default = "conf-0"; + conf-0 { + description = "k3-am62a7-sk-falcon"; + firmware = "atf"; + loadables = "tee", "dm", "tifsstub-hs", "tifsstub-fs"; + }; + }; + }; + }; + ti-spl { insert-template = <&ti_spl_template>; diff --git a/arch/arm/dts/k3-am62p-sk-binman.dtsi b/arch/arm/dts/k3-am62p-sk-binman.dtsi index feb59edcd83..e1443d6226b 100644 --- a/arch/arm/dts/k3-am62p-sk-binman.dtsi +++ b/arch/arm/dts/k3-am62p-sk-binman.dtsi @@ -161,6 +161,57 @@ }; + ti-falcon { + insert-template = <&ti_falcon_template>; + + fit { + images { + tifsstub-hs { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-hs"; + load = <0x9ca00000>; + entry = <0x9ca00000>; + blob-ext { + filename = "tifsstub.bin_hs"; + }; + }; + tifsstub-fs { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-fs"; + load = <0x9ca00000>; + entry = <0x9ca00000>; + blob-ext { + filename = "tifsstub.bin_fs"; + }; + }; + dm { + ti-secure { + content = <&dm_falcon>; + keyfile = "custMpk.pem"; + }; + dm_falcon: ti-dm { + filename = "ti-dm/am62pxx/ipc_echo_testb_mcu1_0_release_strip.xer5f"; + }; + }; + }; + + configurations { + default = "conf-0"; + conf-0 { + description = "k3-am62p5-sk-falcon"; + firmware = "atf"; + loadables = "tee", "dm", "tifsstub-hs", "tifsstub-fs"; + }; + }; + }; + }; + ti-spl { insert-template = <&ti_spl_template>; diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi index 5163161b94d..761b1730464 100644 --- a/arch/arm/dts/k3-binman.dtsi +++ b/arch/arm/dts/k3-binman.dtsi @@ -489,6 +489,60 @@ end_address = <0x0 0x9fffffff>; }; + ti_falcon_template: template-9 { + filename = "tifalcon.bin"; + pad-byte = <0xff>; + + fit { + description = "Configuration for falcon boot"; + #address-cells = <1>; + + images { + atf { + description = "ARM Trusted Firmware"; + type = "firmware"; + arch = "arm64"; + compression = "none"; + os = "arm-trusted-firmware"; + load = <CONFIG_K3_ATF_LOAD_ADDR>; + entry = <CONFIG_K3_ATF_LOAD_ADDR>; + ti-secure { + content = <&atf_falcon>; + keyfile = "custMpk.pem"; + }; + atf_falcon: atf-bl31 { + }; + }; + tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm64"; + compression = "none"; + os = "tee"; + load = <CONFIG_K3_OPTEE_LOAD_ADDR>; + entry = <CONFIG_K3_OPTEE_LOAD_ADDR>; + ti-secure { + content = <&tee_falcon>; + keyfile = "custMpk.pem"; + }; + tee_falcon: tee-os { + optional; + }; + }; + dm { + description = "DM binary"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "DM"; + load = <0x89000000>; + entry = <0x89000000>; + }; + + }; + }; + }; + }; #endif -- 2.51.0
