Hello Wolfgang,
>> rules.mk uses the GNU specific sed \w leading to not directly obvious
>> Make / _depend errors in the build process, like circular dependencies
> You should probably mention when such errors result - I have never seen
> any of these.
>
I understand. Logs for what it solves are below.
For clarity, this only affects systems with a sed version not supporting
the GNU \w option.
>> Current command (gsed = GNU sed, sed = FreeBSD takes \w as w). The first
>> command is not the intention.
>> [jeroen@blue ~]$ echo some/example/test.c | sed -e 's/\(.*\)\.\w/\1.o/';
>> some/example/test.c
>>
>> [..]
>>
>> or shorter (regex are greedy):
>> [jeroen@blue ~]$ echo some/example/test.c | sed -e 's/\(.*\)\..*/\1.o/';
>> some/example/test.o
>> [jeroen@blue ~]$ echo some/example/test.c | gsed -e 's/\(.*\)\..*/\1.o/';
>> some/example/test.o
> I don't think this last version is equivalent to the original code.
> With GNU sed:
>
> -> echo foo/bar-baz.frob-nitz | sed -e 's/\(.*\)\.\w/\1.o/'
> foo/bar-baz.orob-nitz
> -> echo foo/bar-baz.frob-nitz | sed -e 's/\(.*\)\..*/\1.o/'
> foo/bar-baz.o
It is indeed not the exact equivalent; it will always replace the
extension, also if the extension contains non-alphanumerical chars.
I will use the alphanumerical version to be on the safe side..
>> Would you accept a patch for this?
> Yes, of course - if the resultinmg code works, and if you follow
> patch submission rules (like SoB: line etc.).
>
Good, I will check, cygwin/linux and make a patch request when ok (this
weekend or so).
Regards,
Jeroen
[jeroen@blue ~/u-boot]$ gmake ARCH=arm CROSS_COMPILE=arm-none-eabi-
distclean
[jeroen@blue ~/u-boot]$ gmake ARCH=arm CROSS_COMPILE=arm-none-eabi-
at91rm9200ek_config
awk '(NF && $1 !~ /^#/) { print $1 ": " $1 "_config; $(MAKE)" }'
boards.cfg > .boards.depend
Configuring for at91rm9200ek board...
[jeroen@blue ~/u-boot]$ gmake ARCH=arm CROSS_COMPILE=arm-none-eabi- all
Generating include/autoconf.mk
Generating include/autoconf.mk.dep
arm-none-eabi-gcc -DDO_DEPS_ONLY \
-g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__
-DCONFIG_SYS_TEXT_BASE=0x10000000 -I/usr/home/jeroen/u-boot/include
-fno-builtin -ffreestanding -nostdinc -isystem
/usr/compat/linux/usr/local/cs/bin/../lib/gcc/arm-none-eabi/4.5.2/include -pipe
-DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork
-march=armv4 -Wall -Wstrict-prototypes -fno-stack-protector \
-o lib/asm-offsets.s lib/asm-offsets.c -c -S
Generating include/generated/generic-asm-offsets.h
tools/scripts/make-asm-offsets lib/asm-offsets.s
include/generated/generic-asm-offsets.h
for dir in tools examples/standalone examples/api arch/arm/cpu/arm920t
/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t/ ; do \
gmake -C $dir _depend ; done
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Circular hello_world.c <- hello_world.c dependency dropped.
gmake[1]: Circular stubs.c <- stubs.c dependency dropped.
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Circular start.S <- start.S dependency dropped.
gmake[1]: Circular cpu.c <- cpu.c dependency dropped.
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Circular start.S <- start.S dependency dropped.
gmake[1]: Circular cpu.c <- cpu.c dependency dropped.
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake -C tools all
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
arm-none-eabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float
-D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x10000000
-I/usr/home/jeroen/u-boot/include -fno-builtin -ffreestanding -nostdinc
-isystem
/usr/compat/linux/usr/local/cs/bin/../lib/gcc/arm-none-eabi/4.5.2/include -pipe
-DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork
-march=armv4 -Wall -Wstrict-prototypes -fno-stack-protector -o crc32.o
crc32.c -c
arm-none-eabi-gcc: crc32.c: No such file or directory
arm-none-eabi-gcc: no input files
gmake[1]: *** [crc32.o] Error 1
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/tools'
gmake: *** [tools] Error 2
====
edit rules.mk
diff --git a/rules.mk b/rules.mk
index c2860e5..d79fcd3 100644
--- a/rules.mk
+++ b/rules.mk
@@ -29,11 +29,11 @@ $(obj).depend: $(src)Makefile
$(TOPDIR)/config.mk $(SRCS) $(HOSTSRCS)
@rm -f $@
@touch $@
@for f in $(SRCS); do \
- g=`basename $$f | sed -e 's/\(.*\)\.\w/\1.o/'`; \
+ g=`basename $$f | sed -e
's/\(.*\)\.[[:alnum:]_]/\1.o/'`; \
$(CC) -M $(CPPFLAGS) -MQ $(obj)$$g $$f >> $@ ; \
done
@for f in $(HOSTSRCS); do \
- g=`basename $$f | sed -e 's/\(.*\)\.\w/\1.o/'`; \
+ g=`basename $$f | sed -e
's/\(.*\)\.[[:alnum:]_]/\1.o/'`; \
$(HOSTCC) -M $(HOSTCPPFLAGS) -MQ $(obj)$$g $$f
>> $@ ; \
done
[At least on FreeBSD, add typedef for ulong to include/compiler.h,
separate issue]
====
[jeroen@blue ~/u-boot]$ gmake ARCH=arm CROSS_COMPILE=arm-none-eabi-
distclean
Generating include/autoconfGenerating include/autoconf.mk
Generating include/autoconf.mk.dep
arm-none-eabi-gcc -DDO_DEPS_ONLY \
-g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__
-DCONFIG_SYS_TEXT_BASE=0x10000000 -I/usr/home/jeroen/u-boot/include
-fno-builtin -ffreestanding -nostdinc -isystem
/usr/compat/linux/usr/local/cs/bin/../lib/gcc/arm-none-eabi/4.5.2/include -pipe
-DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork
-march=armv4 -Wall -Wstrict-prototypes -fno-stack-protector \
-o lib/asm-offsets.s lib/asm-offsets.c -c -S
Generating include/generated/generic-asm-offsets.h
tools/scripts/make-asm-offsets lib/asm-offsets.s
include/generated/generic-asm-offsets.h
for dir in tools examples/standalone examples/api arch/arm/cpu/arm920t
/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t/ ; do \
gmake -C $dir _depend ; done
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake -C tools all
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -c -o crc32.o
/usr/home/jeroen/u-boot/lib/crc32.c
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o env_embedded.o
/usr/home/jeroen/u-boot/common/env_embedded.c
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o envcrc.o envcrc.c -c
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -c -o sha1.o
/usr/home/jeroen/u-boot/lib/sha1.c
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o envcrc crc32.o
env_embedded.o envcrc.o sha1.o
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o gen_eth_addr.o
gen_eth_addr.c -c.mk
Generating include/autoconf.mk.dep
arm-none-eabi-gcc -DDO_DEPS_ONLY \
-g -Os -fno-common -ffixed-r8 -msoft-float -D__KERNEL__
-DCONFIG_SYS_TEXT_BASE=0x10000000 -I/usr/home/jeroen/u-boot/include
-fno-builtin -ffreestanding -nostdinc -isystem
/usr/compat/linux/usr/local/cs/bin/../lib/gcc/arm-none-eabi/4.5.2/include -pipe
-DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork
-march=armv4 -Wall -Wstrict-prototypes -fno-stack-protector \
-o lib/asm-offsets.s lib/asm-offsets.c -c -S
Generating include/generated/generic-asm-offsets.h
tools/scripts/make-asm-offsets lib/asm-offsets.s
include/generated/generic-asm-offsets.h
for dir in tools examples/standalone examples/api arch/arm/cpu/arm920t
/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t/ ; do \
gmake -C $dir _depend ; done
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/tools'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/standalone'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/examples/api'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Nothing to be done for `_depend'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake -C tools all
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/tools'
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -c -o crc32.o
/usr/home/jeroen/u-boot/lib/crc32.c
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -c -o env_embedded.o
/usr/home/jeroen/u-boot/common/env_embedded.c
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o envcrc.o envcrc.c -c
gcc -g -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -c -o sha1.o
/usr/home/jeroen/u-boot/lib/sha1.c
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o envcrc crc32.o
env_embedded.o envcrc.o sha1.o
gcc -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -idirafter
/usr/home/jeroen/u-boot/include -idirafter
/usr/home/jeroen/u-boot/include2 -idirafter
/usr/home/jeroen/u-boot/include -I /usr/home/jeroen/u-boot/lib/libfdt -I
/usr/home/jeroen/u-boot/tools -DCONFIG_SYS_TEXT_BASE=0x10000000
-DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -pedantic -o gen_eth_addr.o
gen_eth_addr.c -c
[....]
gmake[1]: Leaving directory
`/usr/home/jeroen/u-boot/board/atmel/at91rm9200ek'
gmake -C /usr/home/jeroen/u-boot/arch/arm/cpu/arm920t/ u-boot.lds
gmake[1]: Entering directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
gmake[1]: Nothing to be done for `u-boot.lds'.
gmake[1]: Leaving directory `/usr/home/jeroen/u-boot/arch/arm/cpu/arm920t'
arm-none-eabi-gcc -E -g -Os -fno-common -ffixed-r8 -msoft-float
-D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x10000000
-I/usr/home/jeroen/u-boot/include -fno-builtin -ffreestanding -nostdinc
-isystem
/usr/compat/linux/usr/local/cs/bin/../lib/gcc/arm-none-eabi/4.5.2/include -pipe
-DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork
-march=armv4 -include
/usr/home/jeroen/u-boot/include/u-boot/u-boot.lds.h -ansi
-D__ASSEMBLY__ -P -
</usr/home/jeroen/u-boot/arch/arm/cpu/arm920t/u-boot.lds >u-boot.lds
UNDEF_SYM=`arm-none-eabi-objdump -x
board/atmel/at91rm9200ek/libat91rm9200ek.o api/libapi.o
arch/arm/cpu/arm920t/at91/libat91.o arch/arm/cpu/arm920t/libarm920t.o
arch/arm/lib/libarm.o common/libcommon.o disk/libdisk.o
drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o
drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o
drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o
drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o
drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o
drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o
drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o
drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o
drivers/serial/libserial.o drivers/spi/libspi.o
drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o
drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o
drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o
drivers/video/libvideo.o drivers/watchdog/libwatchdog.o
fs/cramfs/libcramfs.o fs/ext2/libext2fs.o fs/fat/libfat.o
fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o
fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o
lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o
net/libnet.o post/libpost.o | sed -n -e
's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`; cd /usr/home/jeroen/u-boot
&& arm-none-eabi-ld -pie -T u-boot.lds -Bstatic -Ttext 0x10000000
$UNDEF_SYM arch/arm/cpu/arm920t/start.o --start-group api/libapi.o
arch/arm/cpu/arm920t/at91/libat91.o arch/arm/cpu/arm920t/libarm920t.o
arch/arm/lib/libarm.o common/libcommon.o disk/libdisk.o
drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o
drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o
drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o
drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o
drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o
drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o
drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o
drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o
drivers/serial/libserial.o drivers/spi/libspi.o
drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o
drivers/usb/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o
drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o
drivers/video/libvideo.o drivers/watchdog/libwatchdog.o
fs/cramfs/libcramfs.o fs/ext2/libext2fs.o fs/fat/libfat.o
fs/fdos/libfdos.o fs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o
fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o lib/libfdt/libfdt.o
lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o lib/zlib/libz.o
net/libnet.o post/libpost.o board/atmel/at91rm9200ek/libat91rm9200ek.o
--end-group /usr/home/jeroen/u-boot/arch/arm/lib/eabi_compat.o -L
/usr/compat/linux/usr/local/cs/bin/../lib/gcc/arm-none-eabi/4.5.2 -lgcc
-Map u-boot.map -o u-boot
arm-none-eabi-objcopy -O srec u-boot u-boot.srec
arm-none-eabi-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
