After switching our boards to standard boot, we observed that the kernel hangs when booting with the "script" boot method over the network.
The original scriptaddr value was copied from ti_common.env and remained unused for some time. On phycore-am62x and phycore-am62ax, however, this address conflicts with the current location where ATF is loaded (CONFIG_K3_ATF_LOAD_ADDR). Move scriptaddr to 0x89100000, directly after fdtoverlay_addr_r. The phycore-am64x is not affected by this issue, but we update it as well to keep all phycore-am6xx boards consistent. Signed-off-by: Wadim Egorov <w.ego...@phytec.de> --- board/phytec/phycore_am62ax/phycore_am62ax.env | 2 +- board/phytec/phycore_am62x/phycore_am62x.env | 2 +- board/phytec/phycore_am64x/phycore_am64x.env | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/board/phytec/phycore_am62ax/phycore_am62ax.env b/board/phytec/phycore_am62ax/phycore_am62ax.env index ff4ab8c87b8..47e90f1b7c6 100644 --- a/board/phytec/phycore_am62ax/phycore_am62ax.env +++ b/board/phytec/phycore_am62ax/phycore_am62ax.env @@ -5,7 +5,7 @@ fdtaddr=0x88000000 loadaddr=0x82000000 -scriptaddr=0x80000000 +scriptaddr=0x89100000 fdt_addr_r=0x88000000 kernel_addr_r=0x82000000 ramdisk_addr_r=0x88080000 diff --git a/board/phytec/phycore_am62x/phycore_am62x.env b/board/phytec/phycore_am62x/phycore_am62x.env index ff4ab8c87b8..47e90f1b7c6 100644 --- a/board/phytec/phycore_am62x/phycore_am62x.env +++ b/board/phytec/phycore_am62x/phycore_am62x.env @@ -5,7 +5,7 @@ fdtaddr=0x88000000 loadaddr=0x82000000 -scriptaddr=0x80000000 +scriptaddr=0x89100000 fdt_addr_r=0x88000000 kernel_addr_r=0x82000000 ramdisk_addr_r=0x88080000 diff --git a/board/phytec/phycore_am64x/phycore_am64x.env b/board/phytec/phycore_am64x/phycore_am64x.env index cbaf45b3ace..f4136ed237d 100644 --- a/board/phytec/phycore_am64x/phycore_am64x.env +++ b/board/phytec/phycore_am64x/phycore_am64x.env @@ -4,7 +4,7 @@ fdtaddr=0x88000000 loadaddr=0x82000000 -scriptaddr=0x80000000 +scriptaddr=0x89100000 fdt_addr_r=0x88000000 kernel_addr_r=0x82000000 ramdisk_addr_r=0x88080000 -- 2.48.1
