On Wed, Sep 17, 2025 at 11:44:07AM -0400, Raymond Mao wrote:
> Hi Tom,
>
> On Tue, 16 Sept 2025 at 14:27, Tom Rini <tr...@konsulko.com> wrote:
> >
> > On Tue, Sep 16, 2025 at 09:14:18AM -0700, Raymond Mao wrote:
> > > Add a script which is running after buildman to fetch TF-A (v2.13.0)
> > > with MbedTLS (v3.6) and build 'flash.bin', linking built U-Boot as
> > > BL33 and OP-TEE as BL32, with both Firmware Handoff and Measured Boot
> > > enabled.
> > >
> > > Signed-off-by: Raymond Mao <raymond....@linaro.org>
> > > ---
> > > .azure-pipelines.yml | 1 +
> > > .gitlab-ci.yml | 1 +
> > > tools/post_build_tfa_fw_handoff.sh | 87 ++++++++++++++++++++++++++++++
> > > 3 files changed, 89 insertions(+)
> > > create mode 100755 tools/post_build_tfa_fw_handoff.sh
> > >
> > > diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml
> > > index 8209d2b329c..eb547606ddd 100644
> > > --- a/.azure-pipelines.yml
> > > +++ b/.azure-pipelines.yml
> > > @@ -290,6 +290,7 @@ stages:
> > > cp /opt/grub/grubriscv64.efi
> > > \${UBOOT_TRAVIS_BUILD_DIR}/grub_riscv64.efi
> > > cp /opt/grub/grubaa64.efi
> > > \${UBOOT_TRAVIS_BUILD_DIR}/grub_arm64.efi
> > > cp /opt/grub/grubarm.efi
> > > \${UBOOT_TRAVIS_BUILD_DIR}/grub_arm.efi
> > > + ./tools/post_build_tfa_fw_handoff.sh
> > > \${UBOOT_TRAVIS_BUILD_DIR} \${TEST_PY_BD} \${TEST_PY_ID}
> > > # create sdcard / spi-nor images for sifive unleashed using
> > > genimage
> > > if [[ "\${TEST_PY_BD}" == "sifive_unleashed" ]]; then
> > > mkdir -p root;
> > > diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> > > index 85401d3e09b..61e4af96c9a 100644
> > > --- a/.gitlab-ci.yml
> > > +++ b/.gitlab-ci.yml
> > > @@ -79,6 +79,7 @@ stages:
> > > - cp /opt/grub/grubriscv64.efi
> > > $UBOOT_TRAVIS_BUILD_DIR/grub_riscv64.efi
> > > - cp /opt/grub/grubaa64.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm64.efi
> > > - cp /opt/grub/grubarm.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm.efi
> > > + - ./tools/post_build_tfa_fw_handoff.sh ${UBOOT_TRAVIS_BUILD_DIR}
> > > ${TEST_PY_BD} ${TEST_PY_ID}
> > > # create sdcard / spi-nor images for sifive unleashed using genimage
> > > - if [[ "${TEST_PY_BD}" == "sifive_unleashed" ]]; then
> > > mkdir -p root;
> > > diff --git a/tools/post_build_tfa_fw_handoff.sh
> > > b/tools/post_build_tfa_fw_handoff.sh
> > > new file mode 100755
> > > index 00000000000..f876db593ba
> > > --- /dev/null
> > > +++ b/tools/post_build_tfa_fw_handoff.sh
> >
> > The "is this a valid board" check should be in the pipeline file (like
> > where we do all the other board-specific things) instead of the helper
> > script.
> >
> > > @@ -0,0 +1,87 @@
> > > +#!/bin/bash
> > > +# SPDX-License-Identifier: GPL-2.0+
> > > +#
> > > +# Copyright (c) 2025 Linaro Limited
> > > +# Author: Raymond Mao <raymond....@linaro.org>
> > > +#
> > > +# CI Post-buildman script for building TF-A 'flash.bin' with Measured
> > > +# Boot and Firmware Handoff enabled.
> > > +#
> > > +# Usage: from the top level U-Boot source tree, run:
> > > +# $ ./tools/post_build_tfa_fw_handoff.sh ${UBOOT_TRAVIS_BUILD_DIR} \
> > > +# ${TEST_PY_BD} ${TEST_PY_ID}
> > > +#
> > > +# 'bl1.bin', 'fip.bin' and 'flash.bin' will be generated and copied
> > > +# to /tmp.
> > > +
> > > +set -e
> > > +
> > > +BUILDMAN_OUT_DIR=$(realpath "$1")
> > > +BOARD=$2
> > > +ID=$4
> > > +echo "Buildman Outdir: $BUILDMAN_OUT_DIR, Board: $BOARD, ID: $ID"
> >
> > Can we not use fiptool to update the contents of a file here? And build
> > as much as possible in the Dockerfile, like we do for vexpress?
> >
> Sorry I am not quite clear about how it was done for fvp, maybe I
> missed some context, do you mean to build TF-A with OP-TEE at
> Dokerfile and generate a fip.bin without BL33? But then who will
> assemble BL1+fip+u-boot? by test hooks?
So for FVP, in the Dockerfile we say BL33=/dev/null and this gets
packaged correctly. Then in u-boot-test-hooks we have bin/flash.fiptool
which will update "fip" with the just-built u-boot.bin. The logic:
# If we have TF-A binaries, we need to use them.
- if [[ -d /opt/tf-a/"${TEST_PY_BD}" ]]; then
cp /opt/tf-a/"${TEST_PY_BD}"/fip.bin /opt/tf-a/"${TEST_PY_BD}"/bl1.bin
/tmp/;
export fip=/tmp/fip.bin;
export bl1=/tmp/bl1.bin;
export PATH=/opt/Base_RevC_AEMvA_pkg/models/Linux64_GCC-9.3:${PATH};
fi
Is how we know what bl1.bin and fip.bin to use as the base.
--
Tom
signature.asc
Description: PGP signature
