Hi Yannic, On 9/9/25 16:05, Yannic Moog wrote: > Use single make command for compiling blobs and U-Boot. > Update the imx firmware version. > > Signed-off-by: Yannic Moog <y.m...@phytec.de> > --- > doc/board/phytec/imx8mm-phygate-tauri-l.rst | 27 ++++++++++++++--------- > doc/board/phytec/phycore-imx8mm.rst | 28 +++++++++++++++--------- > doc/board/phytec/phycore-imx8mp.rst | 34 > +++++++++++++++++------------ > 3 files changed, 55 insertions(+), 34 deletions(-) > > diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst > b/doc/board/phytec/imx8mm-phygate-tauri-l.rst > index > 7efc9392361b4a867ce2bc18db11aacf31208800..4dd82cd9785fa585ed216664a25f593d4e723dbb > 100644 > --- a/doc/board/phytec/imx8mm-phygate-tauri-l.rst > +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst > @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary > > $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git > $ cd trusted-firmware-a > - $ export CROSS_COMPILE=aarch64-linux-gnu- > - $ export IMX_BOOT_UART_BASE=0x30880000 > - $ make PLAT=imx8mm BL32_BASE=0xbe000000 SPD=opteed bl31 > + $ make -j $(nproc) \ > + CROSS_COMPILE=aarch64-linux-gnu- \ > + PLAT=imx8mm \ > + IMX_BOOT_UART_BASE=0x30880000 \ > + BL32_BASE=0xbe000000 \ > + SPD=opteed \ > + bl31 > > Build the OP-TEE binary > ----------------------- > @@ -32,8 +36,9 @@ Build the OP-TEE binary > > $ git clone https://github.com/OP-TEE/optee_os.git > $ cd optee_os > - $ make CFG_TEE_BENCHMARK=n \ > + $ make -j $(nproc) \ > CROSS_COMPILE=aarch64-linux-gnu- \ > + CFG_TEE_BENCHMARK=n \
CFG_TEE_BENCHMARK=n is not needed anymore > O=out/arm \ > PLATFORM=imx-mx8mm_phygate_tauri_l > > @@ -42,9 +47,9 @@ Get the ddr firmware > > .. code-block:: bash > > - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.23.bin > - $ chmod +x firmware-imx-8.23.bin > - $ ./firmware-imx-8.23.bin > + $ wget > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin > + $ chmod +x firmware-imx-8.28-994fa14.bin > + $ ./firmware-imx-8.28-994fa14.bin > > Build U-Boot for SD card > ------------------------ > @@ -56,15 +61,17 @@ Copy binaries > > $ cp <TF-A dir>/build/imx8mm/release/bl31.bin . > $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin > - $ cp firmware-imx-8.23/firmware/ddr/synopsys/lpddr4*.bin . > + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin . > > Build U-Boot > ^^^^^^^^^^^^ > > .. code-block:: bash > > - $ make imx8mm-phygate-tauri-l_defconfig > - $ make flash.bin > + $ make -j $(nproc) > + CROSS_COMPILE=aarch64-linux-gnu- \ > + imx8mm-phygate-tauri-l_defconfig \ > + flash.bin > > Flash SD card > ^^^^^^^^^^^^^ > diff --git a/doc/board/phytec/phycore-imx8mm.rst > b/doc/board/phytec/phycore-imx8mm.rst > index > ba6299a968ae9980d583b87b46dcccba5aa4a186..d5edbc91474e95f677dd12e5fcc6c16092dea1cd > 100644 > --- a/doc/board/phytec/phycore-imx8mm.rst > +++ b/doc/board/phytec/phycore-imx8mm.rst > @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary > > $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git > $ cd trusted-firmware-a > - $ export CROSS_COMPILE=aarch64-linux-gnu- > - $ export IMX_BOOT_UART_BASE=0x30880000 > - $ make PLAT=imx8mm BL32_BASE=0x7e000000 SPD=opteed bl31 > + $ make -j $(nproc) \ > + CROSS_COMPILE=aarch64-linux-gnu- \ > + PLAT=imx8mm \ > + IMX_BOOT_UART_BASE=0x30880000 \ > + BL32_BASE=0x7e000000 \ > + SPD=opteed \ > + bl31 > > Build the OP-TEE binary > ----------------------- > @@ -32,8 +36,9 @@ Build the OP-TEE binary > > $ git clone https://github.com/OP-TEE/optee_os.git > $ cd optee_os > - $ make CFG_TEE_BENCHMARK=n \ > + $ make -j $(nproc) \ > CROSS_COMPILE=aarch64-linux-gnu- \ > + CFG_TEE_BENCHMARK=n \ Same > O=out/arm \ > PLATFORM=imx-mx8mm_phyboard_polis > > @@ -42,9 +47,9 @@ Get the ddr firmware > > .. code-block:: bash > > - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin > - $ chmod +x firmware-imx-8.19.bin > - $ ./firmware-imx-8.19.bin > + $ wget > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin > + $ chmod +x firmware-imx-8.28-994fa14.bin > + $ ./firmware-imx-8.28-994fa14.bin > > Build U-Boot for SD card > ------------------------ > @@ -55,15 +60,18 @@ Copy binaries > .. code-block:: bash > > $ cp <TF-A dir>/build/imx8mm/release/bl31.bin . > - $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin . > + $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin > + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin . > > Build U-Boot > ^^^^^^^^^^^^ > > .. code-block:: bash > > - $ make phycore-imx8mm_defconfig > - $ make flash.bin > + $ make -j $(nproc) \ > + CROSS_COMPILE=aarch64-linux-gnu- \ > + phycore-imx8mm_defconfig \ > + flash.bin > > Flash SD card > ^^^^^^^^^^^^^ > diff --git a/doc/board/phytec/phycore-imx8mp.rst > b/doc/board/phytec/phycore-imx8mp.rst > index > df087072062a0b8ca2179fecaead4fa3d0b9eff4..0252cbd08249fa37e979e13bb5ffac9c2b7bb723 > 100644 > --- a/doc/board/phytec/phycore-imx8mp.rst > +++ b/doc/board/phytec/phycore-imx8mp.rst > @@ -3,7 +3,7 @@ > phyCORE-i.MX 8M Plus > ==================== > > -The phyCORE-i.MX 8M Plus with 2GB of main memory is supported. > +The phyCORE-i.MX 8M Plus with 1,2,4GB of main memory is supported. > > Quick Start > ----------- > @@ -21,9 +21,13 @@ Build the ARM Trusted firmware binary > > $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git > $ cd trusted-firmware-a > - $ export CROSS_COMPILE=aarch64-linux-gnu- > - $ export IMX_BOOT_UART_BASE=0x30860000 > - $ make PLAT=imx8mp BL32_BASE=0x7e000000 SPD=opteed bl31 > + $ make -j $(nproc) \ > + CROSS_COMPILE=aarch64-linux-gnu- \ > + PLAT=imx8mp \ > + IMX_BOOT_UART_BASE=0x30860000 \ > + BL32_BASE=0x7e000000 \ > + SPD=opteed \ > + bl31 > > Build the OP-TEE binary > ----------------------- > @@ -32,19 +36,19 @@ Build the OP-TEE binary > > $ git clone https://github.com/OP-TEE/optee_os.git > $ cd optee_os > - $ make CROSS_COMPILE=aarch64-linux-gnu- \ > - O=out/arm \ > - PLATFORM=imx-mx8mp_phyboard_pollux \ > - CFG_TZDRAM_START=0x7e000000 > + $ make -j $(nproc) \ > + CROSS_COMPILE=aarch64-linux-gnu- \ > + O=out/arm \ > + PLATFORM=imx-mx8mp_phyboard_pollux > > Get the ddr firmware > -------------------- > > .. code-block:: bash > > - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin > - $ chmod +x firmware-imx-8.19.bin > - $ ./firmware-imx-8.19.bin > + $ wget > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin > + $ chmod +x firmware-imx-8.28-994fa14.bin > + $ ./firmware-imx-8.28-994fa14.bin > > Build U-Boot for SD card > ------------------------ > @@ -56,15 +60,17 @@ Copy binaries > > $ cp <TF-A dir>/build/imx8mp/release/bl31.bin . > $ cp <OP-TEE dir>/out/arm/core/tee-raw.bin tee.bin > - $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin . > + $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr4*.bin . > > Build U-Boot > ^^^^^^^^^^^^ > > .. code-block:: bash > > - $ make phycore-imx8mp_defconfig > - $ make flash.bin > + $ make -j $(nproc) \ > + CROSS_COMPILE=aarch64-linux-gnu- \ > + phycore-imx8mp_defconfig \ > + flash.bin > > Flash SD card > ^^^^^^^^^^^^^ > Regards, -- Jerome
