Hello Aneesh,
Aneesh V wrote:
> Signed-off-by: Aneesh V <ane...@ti.com>
> ---
> arch/arm/cpu/armv7/omap-common/Makefile | 9 ++--
> arch/arm/cpu/armv7/omap-common/spl.c | 56 ++++++++++++++++++++++++++++
> arch/arm/cpu/armv7/omap-common/spl.lds | 62
> +++++++++++++++++++++++++++++++
> 3 files changed, 123 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/omap-common/spl.c
> create mode 100644 arch/arm/cpu/armv7/omap-common/spl.lds
>
[...]
> diff --git a/arch/arm/cpu/armv7/omap-common/spl.c
> b/arch/arm/cpu/armv7/omap-common/spl.c
> new file mode 100644
> index 0000000..b5a5f3c
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/omap-common/spl.c
[...]
> @@ -0,0 +1,56 @@
> +void board_init_f(ulong dummy)
> +{
> + debug(">>board_init_f()\n");
> + relocate_code(CONFIG_SYS_SPL_STACK, &gdata, CONFIG_SYS_SPL_TEXT_BASE);
> + debug("<<board_init_f()\n");
This debug printf will never occur ;-)
BTW: Do you really need to relocate code? You could just load the 2nd
stage loader to ram from board_init_f, or?
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
