Early Boot of remotecores happens at the SPL stage of the bootloader. This feature involves loading a firmware from the boot media to the remotecore and requires the remoteproc, fs_loader and reset drivers at the SPL stage. Enable the configs for the same.
Signed-off-by: Beleswar Padhi <b-pa...@ti.com> --- configs/am57xx_evm_defconfig | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 911715e6141..9768115f4c0 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -7,6 +7,8 @@ CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" CONFIG_OMAP54XX=y CONFIG_TARGET_AM57XX_EVM=y +CONFIG_DM_RESET=y +CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_TEXT_BASE=0x40300000 CONFIG_SYS_BOOTM_LEN=0x4000000 CONFIG_SPL=y @@ -38,6 +40,8 @@ CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x1500 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS=0x200 +CONFIG_SPL_DM_RESET=y +CONFIG_SPL_REMOTEPROC=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000 CONFIG_SYS_SPI_KERNEL_OFFS=0x1E0000 @@ -84,6 +88,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_SYS_I2C_EEPROM_ADDR=0x50 +CONFIG_SPL_FS_LOADER=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_OMAP_HS=y CONFIG_HSMMC2_8BIT=y @@ -102,6 +107,8 @@ CONFIG_PMIC_PALMAS=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_PALMAS=y CONFIG_PALMAS_POWER=y +CONFIG_REMOTEPROC_TI_IPU=y +CONFIG_RESET_DRA7=y CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y -- 2.34.1
