A few pinctrl drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
drivers/pinctrl/Kconfig | 7 ++++---
drivers/pinctrl/tegra/Kconfig | 4 ++--
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 5e2808abc8a9..48119694031d 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -197,7 +197,7 @@ config PINCTRL_AR933X
config PINCTRL_AT91
bool "AT91 pinctrl driver"
- depends on DM
+ depends on DM && ARCH_AT91
help
This option is to enable the AT91 pinctrl driver for AT91 PIO
controller.
@@ -213,13 +213,14 @@ config PINCTRL_AT91
config PINCTRL_AT91PIO4
bool "AT91 PIO4 pinctrl driver"
- depends on DM
+ depends on DM && ARCH_AT91
help
This option is to enable the AT91 pinctrl driver for AT91 PIO4
controller which is available on SAMA5D2 SoC.
config PINCTRL_INTEL
bool "Standard Intel pin-control and pin-mux driver"
+ depends on X86
help
Recent Intel chips such as Apollo Lake (APL) use a common pin control
and GPIO scheme. The settings for this come from an SoC-specific
@@ -248,7 +249,7 @@ config PINCTRL_QCA953X
config PINCTRL_QE
bool "QE based pinctrl driver, like on mpc83xx"
- depends on DM
+ depends on DM && MPC83xx
help
This option is to enable the QE pinctrl driver for QE based io
controller.
diff --git a/drivers/pinctrl/tegra/Kconfig b/drivers/pinctrl/tegra/Kconfig
index 669d8e258e43..d2630289d750 100644
--- a/drivers/pinctrl/tegra/Kconfig
+++ b/drivers/pinctrl/tegra/Kconfig
@@ -2,7 +2,7 @@
config PINCTRL_TEGRA
bool "Nvidia Tegra pinctrl driver"
- depends on DM
+ depends on DM && ARCH_TEGRA
help
Support pin multiplexing control on Nvidia Tegra SoCs.
The driver is an overlay to existing driver and allows
@@ -11,7 +11,7 @@ config PINCTRL_TEGRA
config SPL_PINCTRL_TEGRA
bool "Nvidia Tegra SPL pinctrl driver"
- depends on SPL_PINCTRL
+ depends on SPL_PINCTRL && ARCH_TEGRA
help
Enables support of pre-DM version of pin multiplexing
control driver used on SPL stage for board setup and
--
2.43.0
