In denali_wait_for_irq the code will either return from inside the while
loop or exit with time_left being 0. The following test for time_left
being 0 is guranteed to be true so remove the test and the following
unreachable code.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodb...@linaro.org>
---
drivers/mtd/nand/raw/denali.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index b2401116689..39cb641e0b3 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -173,13 +173,9 @@ static uint32_t denali_wait_for_irq(struct
denali_nand_info *denali,
time_left--;
}
- if (!time_left) {
- dev_err(denali->dev, "timeout while waiting for irq 0x%x\n",
- irq_mask);
- return 0;
- }
-
- return denali->irq_status;
+ dev_err(denali->dev, "timeout while waiting for irq 0x%x\n",
+ irq_mask);
+ return 0;
}
static uint32_t denali_check_irq(struct denali_nand_info *denali)
--
2.39.5
