Increase the PHY Auto-Negotiation timeout to 20,000 ms from the current default of 4,000 ms inherited from "Kconfig" for PHY_ANEG_TIMEOUT.
The motivation for this change is that existing devices will continue working as-is (timeout is an upper bound and auto-negotiation can be done earlier), while older Hardware connected to the board that might occasionally take longer than 4,000 ms for the Auto-Negotiation process will benefit from an increased timeout. Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> --- configs/am62x_evm_a53_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig index 4da668396d0..723c42e79ca 100644 --- a/configs/am62x_evm_a53_defconfig +++ b/configs/am62x_evm_a53_defconfig @@ -108,6 +108,7 @@ CONFIG_SPI_FLASH_SOFT_RESET=y CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_S28HX_T=y +CONFIG_PHY_ANEG_TIMEOUT=20000 CONFIG_PHY_TI_DP83867=y CONFIG_PHY_FIXED=y CONFIG_TI_AM65_CPSW_NUSS=y -- 2.34.1
