On Fri, 18 Jul 2025 00:54:55 +0100 Andre Przywara <andre.przyw...@arm.com> wrote:
Hi Yixun, see below for a comment on the missing eMMC support for the Radxa defconfig. My board doesn't have eMMC, so can you please check this on your end? > So far developers seem to use three popular boards: > - Avaota A1: dev board with USB 3.0, dual Ethernet, small display > - X96QPro+: TV box with Gigabit Ethernet, USB 3.0, eMMC > - Radxa A5E: small dev board with USB3/M.2 2230 (muxed), dual Ethernet > > Add the defconfig files for those boards, containing the DRAM parameters > and the usual Kconfig options. > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com> > --- > board/sunxi/MAINTAINERS | 15 +++++++++++++++ > configs/avaota-a1_defconfig | 31 +++++++++++++++++++++++++++++++ > configs/radxa-a5e_defconfig | 30 ++++++++++++++++++++++++++++++ > configs/x96q_pro_plus_defconfig | 32 ++++++++++++++++++++++++++++++++ > 4 files changed, 108 insertions(+) > create mode 100644 configs/avaota-a1_defconfig > create mode 100644 configs/radxa-a5e_defconfig > create mode 100644 configs/x96q_pro_plus_defconfig > > diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS > index 1b4b7d87163..66e6a8ff962 100644 > --- a/board/sunxi/MAINTAINERS > +++ b/board/sunxi/MAINTAINERS > @@ -137,6 +137,11 @@ M: Chris Morgan <macromor...@hotmail.com> > S: Maintained > F: configs/anbernic_rg35xx_h700_defconfig > > +AVAOTA A1 BOARD > +M: Andre Przywara <andre.przyw...@arm.com> > +S: Maintained > +F: configs/avaota-a1_defconfig > + > BANANAPI M1 PLUS > M: Jagan Teki <ja...@amarulasolutions.com> > S: Maintained > @@ -531,6 +536,11 @@ M: Quentin Schulz > <quentin.sch...@free-electrons.com> > S: Maintained > F: configs/parrot_r16_defconfig > > +RADXA CUBIE A5E BOARD > +M: Andre Przywara <andre.przyw...@arm.com> > +S: Maintained > +F: configs/radxa-a5e_defconfig > + > SINLINX SINA31s BOARD > M: Chen-Yu Tsai <w...@csie.org> > S: Maintained > @@ -591,6 +601,11 @@ M: Andre Przywara <andre.przyw...@arm.com> > S: Maintained > F: configs/x96_mate_defconfig > > +X96Q PRO+ TV BOX > +M: Andre Przywara <andre.przyw...@arm.com> > +S: Maintained > +F: configs/x96q_pro_plus_defconfig > + > YONES TOPTECH BD1078 BOARD > M: Paul Kocialkowski <cont...@paulk.fr> > S: Maintained > diff --git a/configs/avaota-a1_defconfig b/configs/avaota-a1_defconfig > new file mode 100644 > index 00000000000..55457edd3b3 > --- /dev/null > +++ b/configs/avaota-a1_defconfig > @@ -0,0 +1,31 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun55i-t527-avaota-a1" > +CONFIG_SPL=y > +CONFIG_DRAM_SUNXI_DX_ODT=0x07070707 > +CONFIG_DRAM_SUNXI_DX_DRI=0x0d0d0d0d > +CONFIG_DRAM_SUNXI_CA_DRI=0x0e0e > +CONFIG_DRAM_SUNXI_ODT_EN=0x84848484 > +CONFIG_DRAM_SUNXI_TPR0=0x80808080 > +CONFIG_DRAM_SUNXI_TPR1=0x06060606 > +CONFIG_DRAM_SUNXI_TPR6=0x38000000 > +CONFIG_DRAM_SUNXI_TPR10=0x802f3333 > +CONFIG_DRAM_SUNXI_TPR11=0xc7c5c4c2 > +CONFIG_DRAM_SUNXI_TPR12=0x3533302f > +CONFIG_MACH_SUN55I_A523=y > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > +CONFIG_R_I2C_ENABLE=y > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_SPL_I2C=y > +CONFIG_SPL_SYS_I2C_LEGACY=y > +CONFIG_SYS_I2C_MVTWSI=y > +CONFIG_SYS_I2C_SLAVE=0x7f > +CONFIG_SYS_I2C_SPEED=400000 > +CONFIG_SUPPORT_EMMC_BOOT=y > +CONFIG_REGULATOR_AXP=y > +CONFIG_AXP717_POWER=y > +CONFIG_AXP_I2C_ADDRESS=0x35 > +CONFIG_AXP_DCDC2_VOLT=920 > +CONFIG_AXP_DCDC3_VOLT=1160 > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_OHCI_HCD=y > diff --git a/configs/radxa-a5e_defconfig b/configs/radxa-a5e_defconfig > new file mode 100644 > index 00000000000..012e7b4eeaf > --- /dev/null > +++ b/configs/radxa-a5e_defconfig > @@ -0,0 +1,30 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun55i-a527-cubie-a5e" > +CONFIG_SPL=y > +CONFIG_DRAM_SUNXI_DX_ODT=0x07070707 > +CONFIG_DRAM_SUNXI_DX_DRI=0x0d0d0d0d > +CONFIG_DRAM_SUNXI_CA_DRI=0x0e0e > +CONFIG_DRAM_SUNXI_ODT_EN=0x84848484 > +CONFIG_DRAM_SUNXI_TPR0=0x80808080 > +CONFIG_DRAM_SUNXI_TPR1=0x06060606 > +CONFIG_DRAM_SUNXI_TPR6=0x38000000 > +CONFIG_DRAM_SUNXI_TPR10=0x802f3333 > +CONFIG_DRAM_SUNXI_TPR11=0xc7c5c4c2 > +CONFIG_DRAM_SUNXI_TPR12=0x3533302f > +# BSP value: CONFIG_DRAM_SUNXI_TPR11=0xc6c4c2c0 > +# BSP value: CONFIG_DRAM_SUNXI_TPR12=0x3a373233 > +CONFIG_MACH_SUN55I_A523=y > +CONFIG_R_I2C_ENABLE=y > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_SPL_I2C=y > +CONFIG_SPL_SYS_I2C_LEGACY=y > +CONFIG_SYS_I2C_MVTWSI=y > +CONFIG_SYS_I2C_SLAVE=0x7f > +CONFIG_SYS_I2C_SPEED=400000 > +CONFIG_REGULATOR_AXP=y > +CONFIG_AXP717_POWER=y > +CONFIG_AXP_DCDC2_VOLT=920 > +CONFIG_AXP_DCDC3_VOLT=1100 > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_OHCI_HCD=y This is missing CONFIG_MMC_SUNXI_SLOT_EXTRA=2 and CONFIG_SUPPORT_EMMC_BOOT=y, as there are Radxa boards with eMMC. The DT describes this, so we should follow suit here, to allow eMMC booting. Should not harm boards without the eMMC chip. Thanks, Andre > diff --git a/configs/x96q_pro_plus_defconfig b/configs/x96q_pro_plus_defconfig > new file mode 100644 > index 00000000000..07d3b078bef > --- /dev/null > +++ b/configs/x96q_pro_plus_defconfig > @@ -0,0 +1,32 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun55i-h728-x96qpro+" > +CONFIG_SPL=y > +CONFIG_DRAM_SUNXI_DX_ODT=0x07070707 > +CONFIG_DRAM_SUNXI_DX_DRI=0x0c0c0c0c > +CONFIG_DRAM_SUNXI_CA_DRI=0x0e0e > +CONFIG_DRAM_SUNXI_ODT_EN=0x90909090 > +CONFIG_DRAM_SUNXI_TPR0=0x80808080 > +CONFIG_DRAM_SUNXI_TPR1=0x06060606 > +CONFIG_DRAM_SUNXI_TPR6=0x3380807e > +CONFIG_DRAM_SUNXI_TPR10=0x802f7788 > +CONFIG_DRAM_SUNXI_TPR11=0x8f919190 > +CONFIG_DRAM_SUNXI_TPR12=0x22222723 > +CONFIG_MACH_SUN55I_A523=y > +CONFIG_SUNXI_DRAM_A523_DDR3=y > +CONFIG_DRAM_CLK=792 > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > +CONFIG_R_I2C_ENABLE=y > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_SPL_I2C=y > +CONFIG_SPL_SYS_I2C_LEGACY=y > +CONFIG_SYS_I2C_MVTWSI=y > +CONFIG_SYS_I2C_SLAVE=0x7f > +CONFIG_SYS_I2C_SPEED=400000 > +CONFIG_SUPPORT_EMMC_BOOT=y > +CONFIG_REGULATOR_AXP=y > +CONFIG_AXP717_POWER=y > +CONFIG_AXP_DCDC2_VOLT=920 > +CONFIG_AXP_DCDC3_VOLT=1360 > +CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_OHCI_HCD=y
