Applied to next branch.
Thanks.
Nobuhiro
2011/6/9 Phil Edworthy <phil.edwor...@renesas.com>:
> Adjusted default settings so that we can boot zImages and uImages.
> Removed unused settings, use default commands and where possible
> calculate all other settings.
>
> Signed-off-by: Phil Edworthy <phil.edwor...@renesas.com>
> Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org>
> ---
> Changes for v2:
> - Moved u-boot relocation address to top 256KB of ram
> - Removed comments about how memory is used
> - Less unnecessary tidying up
>
> include/configs/rsk7264.h | 69 +++++++++++++++-----------------------------
> 1 files changed, 24 insertions(+), 45 deletions(-)
>
> diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h
> index aef37d0..8801993 100644
> --- a/include/configs/rsk7264.h
> +++ b/include/configs/rsk7264.h
> @@ -1,5 +1,5 @@
> /*
> - * Configuation settings for the Renesas Technology RSK 7264
> + * Configuation settings for the Renesas RSK2+SH7264 board
> *
> * Copyright (C) 2011 Renesas Electronics Europe Ltd.
> * Copyright (C) 2008 Nobuhiro Iwamatsu
> @@ -17,83 +17,62 @@
> #define CONFIG_SH2 1
> #define CONFIG_SH2A 1
> #define CONFIG_CPU_SH7264 1
> -#define CONFIG_RSK7264 1
> +#define CONFIG_RSK7264 1
>
> -#define CONFIG_CMD_FLASH
> -#define CONFIG_CMD_NET
> -#define CONFIG_CMD_NFS
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_SAVEENV
> -#define CONFIG_CMD_SDRAM
> -#define CONFIG_CMD_MEMORY
> -#define CONFIG_CMD_CACHE
> +#ifndef _CONFIG_CMD_DEFAULT_H
> +# include <config_cmd_default.h>
> +#endif
>
> #define CONFIG_BAUDRATE 115200
> #define CONFIG_BOOTARGS "console=ttySC3,115200"
> #define CONFIG_BOOTDELAY 3
> -#define CONFIG_LOADADDR 0x0C100000 /* RSK7264_SDRAM_BASE +
> 1MB */
> +#define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
>
> -#define CONFIG_VERSION_VARIABLE
> -#undef CONFIG_SHOW_BOOT_PROGRESS
> -
> -/* MEMORY */
> -#define RSK7264_SDRAM_BASE 0x0C000000
> -#define RSK7264_FLASH_BASE_1 0x20000000 /* Non cache */
> -
> -#define CONFIG_SYS_TEXT_BASE 0x0C1C0000
> -#define CONFIG_SYS_LONGHELP /* undef to save memory */
> +#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
> #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
> #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the
> Console */
> #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
> #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor
> commands */
> -/* Buffer size for Boot Arguments passed to kernel */
> -#define CONFIG_SYS_BARGSIZE 512
> -/* List of legal baudrate settings for this board */
> -#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
>
> -/* SCIF */
> +/* Serial */
> #define CONFIG_SCIF_CONSOLE 1
> #define CONFIG_CONS_SCIF3 1
>
> -#define CONFIG_SYS_MEMTEST_START RSK7264_SDRAM_BASE
> -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (3 * 1024
> * 1024))
> -
> -#define CONFIG_SYS_SDRAM_BASE RSK7264_SDRAM_BASE
> +/* Memory */
> +/* u-boot relocated to top 256KB of ram */
> +#define CONFIG_SYS_TEXT_BASE 0x0CFC0000
> +#define CONFIG_SYS_SDRAM_BASE 0x0C000000
> #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
>
> -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 1024 * 1024)
> -#define CONFIG_SYS_MONITOR_BASE RSK7264_FLASH_BASE_1
> -#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
> +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
> #define CONFIG_SYS_MALLOC_LEN (256 * 1024)
> -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
> +#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
> +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4*1024*1024)
>
> -/* FLASH */
> +/* Flash */
> #define CONFIG_FLASH_CFI_DRIVER
> #define CONFIG_SYS_FLASH_CFI
> #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
> -#undef CONFIG_SYS_FLASH_QUIET_TEST
> -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on
> flinfo */
> -#define CONFIG_SYS_FLASH_BASE RSK7264_FLASH_BASE_1
> -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
> -#define CONFIG_SYS_MAX_FLASH_SECT 512
> +#define CONFIG_SYS_FLASH_BASE 0x20000000 /* Non-cached */
> #define CONFIG_SYS_MAX_FLASH_BANKS 1
> +#define CONFIG_SYS_MAX_FLASH_SECT 512
>
> -#define CONFIG_ENV_IS_IN_FLASH
> +#define CONFIG_ENV_IS_IN_FLASH 1
> +#define CONFIG_ENV_OFFSET (128 * 1024)
> +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE +
> CONFIG_ENV_OFFSET)
> #define CONFIG_ENV_SECT_SIZE (128 * 1024)
> #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
> -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE +
> CONFIG_SYS_MONITOR_LEN)
> -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
> -#define CONFIG_SYS_FLASH_WRITE_TOUT 500
>
> /* Board Clock */
> #define CONFIG_SYS_CLK_FREQ 33333333
> -#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */
> +#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or
> 512 */
> #define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
>
> /* Network interface */
> #define CONFIG_NET_MULTI
> #define CONFIG_SMC911X
> #define CONFIG_SMC911X_16_BIT
> -#define CONFIG_SMC911X_BASE (0x28000000)
> +#define CONFIG_SMC911X_BASE 0x28000000
>
> #endif /* __RSK7264_H */
> --
> 1.7.0.4
>
>
--
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org}
GPG ID: 40AD1FA6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
