On Fri, Jul 4, 2025 at 9:02 AM Jerome Forissier <jerome.foriss...@linaro.org> wrote:
> OK. Then I suggest adding a debug traces to the INITCALL() macro to see > how far the init goes. I added some debug traces inside the INITCALL() macro, but when it hangs in SPL, no output is seen. There's something very fragile: depending on what is removed from the defconfig, the board can boot or not. For example, by removing the following lines, the board boots: --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -73,11 +73,6 @@ CONFIG_SYS_MMC_ENV_DEV=1 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_ARP_TIMEOUT=200 CONFIG_BOUNCE_BUFFER=y -CONFIG_USB_FUNCTION_FASTBOOT=y -CONFIG_FASTBOOT_BUF_ADDR=0x12000000 -CONFIG_FASTBOOT_BUF_SIZE=0x10000000 -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y CONFIG_SUPPORT_EMMC_BOOT=y @@ -111,8 +106,6 @@ CONFIG_SYSRESET_WATCHDOG=y CONFIG_IMX_THERMAL=y CONFIG_USB=y CONFIG_SPL_USB_HOST=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y CONFIG_USB_GADGET=y CONFIG_SPL_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL"
