The Motorola MSM8916-based smartphones all use UART1 with 2 pins (TX, RX) as debug UART console, so make use of the new &blsp_uart1_console_default template. This applies the needed bias-pull-up to avoid garbage input, bootph-all for U-Boot and avoids having to override the UART pins.
Reviewed-by: Konrad Dybcio <konrad.dyb...@oss.qualcomm.com> Signed-off-by: Stephan Gerhold <stephan.gerh...@linaro.org> Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-4-f345b7a53...@linaro.org Signed-off-by: Bjorn Andersson <anders...@kernel.org> [ upstream commit: fe848d64cc6516cd56f38d23cfb544a68231a6e8 ] (cherry picked from commit f7626223fbef2ae0435cbb72e15e21277f23a180) --- dts/upstream/src/arm64/qcom/msm8916-motorola-common.dtsi | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/dts/upstream/src/arm64/qcom/msm8916-motorola-common.dtsi b/dts/upstream/src/arm64/qcom/msm8916-motorola-common.dtsi index 48134e5ff524fd5708db7b9c3a567ec3f751868c..4e202e7ed7db1921f347ca8b4a01ccec593a8d8e 100644 --- a/dts/upstream/src/arm64/qcom/msm8916-motorola-common.dtsi +++ b/dts/upstream/src/arm64/qcom/msm8916-motorola-common.dtsi @@ -69,8 +69,8 @@ }; &blsp_uart1 { - pinctrl-0 = <&blsp_uart1_default>; - pinctrl-1 = <&blsp_uart1_sleep>; + pinctrl-0 = <&blsp_uart1_console_default>; + pinctrl-1 = <&blsp_uart1_console_sleep>; pinctrl-names = "default", "sleep"; status = "okay"; }; @@ -132,14 +132,6 @@ status = "okay"; }; -/* CTS/RTX are not used */ -&blsp_uart1_default { - pins = "gpio0", "gpio1"; -}; -&blsp_uart1_sleep { - pins = "gpio0", "gpio1"; -}; - &tlmm { gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; -- 2.49.0
