> Gesendet: Sonntag, 11. Mai 2025 um 07:14 > Von: "Lucien.Jheng" <lucienzx...@gmail.com> > Betreff: [U-Boot, v1, 1/1] net: phy: Add the Airoha EN8811H PHY driver > > Add the driver for the Airoha EN8811H 2.5 Gigabit PHY. The PHY supports > 100/1000/2500 Mbps with auto negotiation only. > > The driver uses two firmware files, for which updated versions are added to > linux-firmware already. > > Locating the AIROHA FW within the filesystem at the designated partition > and path will trigger its automatic loading and writing to the PHY via MDIO. > If need board specific loading override, > please override the en8811h_read_fw function on board or architecture level. > > Linux upstream AIROHA EN8811H driver commit: > 71e79430117d56c409c5ea485a263bc0d8083390 > > Based on the Linux upstream AIROHA EN8811H driver code(air_en8811h.c), > I have modified the relevant process to align with the U-Boot boot sequence. > and have validated this on Banana Pi BPI-R3 Mini. > > Signed-off-by: Lucien.Jheng <lucienzx...@gmail.com> > --- > drivers/net/phy/Kconfig | 43 ++ > drivers/net/phy/air_en8811h.c | 852 ++++++++++++++++++++++++++++++++++ > 2 files changed, 895 insertions(+) > create mode 100644 drivers/net/phy/air_en8811h.c
Hi, is there any progress? i see no review or apply (+tom in To-header). regards Frank
