As the list of entries grows let's alphabetize the list to make searching a little easier. No functional changes intended
Signed-off-by: Bryan Brattlof <b...@ti.com> --- tools/binman/missing-blob-help | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help index ab0023eb9fb59fb84757770bcec4993d8351e9fb..b73b16f18491c2b45300ee4734d0f57eebb5635b 100644 --- a/tools/binman/missing-blob-help +++ b/tools/binman/missing-blob-help @@ -14,15 +14,6 @@ atf-bl31-sunxi: Please read the section on ARM Trusted Firmware (ATF) in board/sunxi/README.sunxi64 -scp-sunxi: -SCP firmware is required for system suspend, but is otherwise optional. -Please read the section on SCP firmware in board/sunxi/README.sunxi64 - -iot2050-seboot: -See the documentation for IOT2050 board. Your image is missing SEBoot -which is mandatory for board startup. Prebuilt SEBoot located at -meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin. - iot2050-otpcmd: See the documentation for IOT2050 board. Your image is missing OTP command data block which is used for provisioning the customer keys to the board. @@ -31,22 +22,31 @@ meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otp for how to generate this binary. If you are not using secure boot or do not intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD. +iot2050-seboot: +See the documentation for IOT2050 board. Your image is missing SEBoot +which is mandatory for board startup. Prebuilt SEBoot located at +meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin. + k3-rti-wdt-firmware: If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for the R5F core(s) to trigger the system reset. One possible source is https://github.com/siemens/k3-rti-wdt. -rockchip-tpl: -An external TPL is required to initialize DRAM. Get the external TPL -binary and build with ROCKCHIP_TPL=/path/to/ddr.bin. One possible source -for the external TPL binary is https://github.com/rockchip-linux/rkbin. - -tee-os: -See the documentation for your board. You may need to build Open Portable -Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin - opensbi: See the documentation for your board. The OpenSBI git repo is at https://github.com/riscv/opensbi.git You may need to build fw_dynamic.bin first and re-build u-boot with OPENSBI=/path/to/fw_dynamic.bin + +rockchip-tpl: +An external TPL is required to initialize DRAM. Get the external TPL +binary and build with ROCKCHIP_TPL=/path/to/ddr.bin. One possible source +for the external TPL binary is https://github.com/rockchip-linux/rkbin. + +scp-sunxi: +SCP firmware is required for system suspend, but is otherwise optional. +Please read the section on SCP firmware in board/sunxi/README.sunxi64 + +tee-os: +See the documentation for your board. You may need to build Open Portable +Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin -- 2.49.0
