From: Chao-ying Fu <c...@mips.com>
Add a GPIO driver for the Intel EG20T Platform Controller Hub, which
exposes a set of 12 GPIOs via PCI MMIO.
The driver implements basic GPIO operations (input/output direction,
value read/write, and function query) using the U-Boot driver model
infrastructure. It maps the required BAR1 region via `dm_pci_map_bar`
and uses internal registers to control pin state and direction.
This driver is required for platforms using EG20T, such as P8700-based
systems, to access GPIOs through the standard U-Boot DM GPIO framework.
Signed-off-by: Chao-ying Fu <c...@mips.com>
Signed-off-by: Uros Stajic <uros.sta...@htecgroup.com>
---
board/mips/boston-riscv/MAINTAINERS | 1 +
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/eg20t-gpio.c | 138 ++++++++++++++++++++++++++++
4 files changed, 147 insertions(+)
create mode 100644 drivers/gpio/eg20t-gpio.c
diff --git a/board/mips/boston-riscv/MAINTAINERS
b/board/mips/boston-riscv/MAINTAINERS
index e350121395e..bc59a628c79 100644
--- a/board/mips/boston-riscv/MAINTAINERS
+++ b/board/mips/boston-riscv/MAINTAINERS
@@ -7,3 +7,4 @@ F: arch/riscv/cpu/p8700/
F: arch/riscv/include/asm/arch-p8700/
F: configs/boston-p8700_defconfig
F: arch/riscv/dts/boston-p8700.dts
+F: drivers/gpio/eg20t-gpio.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e11109fb56d..3a45c1e1158 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -731,3 +731,10 @@ config SPL_ADP5585_GPIO
Support ADP5585 GPIO expander in SPL.
endif
+
+config EG20T_GPIO
+ bool "Intel EG20T GPIO driver"
+ depends on DM_GPIO && DM_PCI
+ help
+ Enable this to support the GPIO controller found in the Intel EG20T
+ Platform Controller Hub.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d64c14db5cf..23b18401f9a 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_SLG7XL45106_I2C_GPO) += gpio_slg7xl45106.o
obj-$(CONFIG_FTGPIO010) += ftgpio010.o
obj-$(CONFIG_$(PHASE_)ADP5585_GPIO) += adp5585_gpio.o
obj-$(CONFIG_RZG2L_GPIO) += rzg2l-gpio.o
+obj-$(CONFIG_EG20T_GPIO) += eg20t-gpio.o
diff --git a/drivers/gpio/eg20t-gpio.c b/drivers/gpio/eg20t-gpio.c
new file mode 100644
index 00000000000..d41ca4bfb17
--- /dev/null
+++ b/drivers/gpio/eg20t-gpio.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ */
+
+#include <dm.h>
+#include <errno.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <log.h>
+
+enum {
+ REG_IEN = 0x00,
+ REG_ISTATUS = 0x04,
+ REG_IDISP = 0x08,
+ REG_ICLR = 0x0c,
+ REG_IMASK = 0x10,
+ REG_IMASKCLR = 0x14,
+ REG_PO = 0x18,
+ REG_PI = 0x1c,
+ REG_PM = 0x20,
+};
+
+struct eg20t_gpio_priv {
+ void *base;
+};
+
+static int eg20t_gpio_get_value(struct udevice *dev, unsigned int offset)
+{
+ struct eg20t_gpio_priv *priv = dev_get_priv(dev);
+ u32 pm, pval;
+
+ pm = readl(priv->base + REG_PM);
+ if ((pm >> offset) & 0x1)
+ pval = readl(priv->base + REG_PO);
+ else
+ pval = readl(priv->base + REG_PI);
+
+ return (pval >> offset) & 0x1;
+}
+
+static int eg20t_gpio_set_value(struct udevice *dev, unsigned int offset,
+ int value)
+{
+ struct eg20t_gpio_priv *priv = dev_get_priv(dev);
+ u32 po;
+
+ po = readl(priv->base + REG_PO);
+ if (value)
+ po |= 1 << offset;
+ else
+ po &= ~(1 << offset);
+ writel(po, priv->base + REG_PO);
+ return 0;
+}
+
+static int eg20t_gpio_direction_input(struct udevice *dev, unsigned int offset)
+{
+ struct eg20t_gpio_priv *priv = dev_get_priv(dev);
+ u32 pm;
+
+ pm = readl(priv->base + REG_PM);
+ pm &= ~(1 << offset);
+ writel(pm, priv->base + REG_PM);
+ return 0;
+}
+
+static int eg20t_gpio_direction_output(struct udevice *dev, unsigned int
offset,
+ int value)
+{
+ struct eg20t_gpio_priv *priv = dev_get_priv(dev);
+ u32 pm;
+
+ pm = readl(priv->base + REG_PM);
+ pm |= 1 << offset;
+ writel(pm, priv->base + REG_PM);
+
+ return eg20t_gpio_set_value(dev, offset, value);
+}
+
+static int eg20t_gpio_get_function(struct udevice *dev, unsigned int offset)
+{
+ struct eg20t_gpio_priv *priv = dev_get_priv(dev);
+ u32 pm;
+
+ pm = readl(priv->base + REG_PM);
+
+ if ((pm >> offset) & 0x1)
+ return GPIOF_OUTPUT;
+
+ return GPIOF_INPUT;
+}
+
+static const struct dm_gpio_ops eg20t_gpio_ops = {
+ .direction_input = eg20t_gpio_direction_input,
+ .direction_output = eg20t_gpio_direction_output,
+ .get_value = eg20t_gpio_get_value,
+ .set_value = eg20t_gpio_set_value,
+ .get_function = eg20t_gpio_get_function,
+};
+
+static int eg20t_gpio_probe(struct udevice *dev)
+{
+ struct eg20t_gpio_priv *priv = dev_get_priv(dev);
+ struct gpio_dev_priv *uc_priv = dev->uclass_priv;
+
+ priv->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_1, PCI_REGION_MEM);
+ if (!priv->base) {
+ debug("failed to map GPIO registers\n");
+ return -EINVAL;
+ }
+
+ uc_priv->gpio_count = 12;
+ uc_priv->bank_name = "eg20t";
+ return 0;
+}
+
+static const struct udevice_id eg20t_gpio_ids[] = {
+ { .compatible = "intel,eg20t-gpio" },
+ { }
+};
+
+U_BOOT_DRIVER(eg20t_gpio) = {
+ .name = "eg20t-gpio",
+ .id = UCLASS_GPIO,
+ .of_match = eg20t_gpio_ids,
+ .probe = eg20t_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct eg20t_gpio_priv),
+ .ops = &eg20t_gpio_ops,
+};
+
+static struct pci_device_id eg20t_gpio_supported[] = {
+ { PCI_VENDOR_ID_INTEL, 0x8803 },
+ { },
+};
+
+U_BOOT_PCI_DEVICE(eg20t_gpio, eg20t_gpio_supported);
--
2.34.1
