On Sat, May 31, 2025 at 09:37:09AM +0200, Lukasz Majewski wrote: > The btt[c3] devices are based on imx287 SoC. > > U-Boot SPL 2025.04-01081-g07e086681d26 (Apr 16 2025 - 12:24:36 +0200) > Trying to boot from MMC1 > > U-Boot 2025.04-01081-g07e086681d26 (Apr 16 2025 - 12:24:36 +0200) > > CPU: Freescale i.MX28 rev1.2 at 454 MHz > BOOT: SSP SPI #3, master, 3V3 NOR > Model: BTT3 > Board: LWE BTT SoM HW rev 0 > DRAM: 256 MiB > Core: 86 devices, 15 uclasses, devicetree: separate > MMC: MXS MMC: 0 > Loading Environment from SPIFlash... SF: Detected is25lp128 with page > size 256 Bytes, erase size 64 KiB, total 16 MiB > OK > In: serial@80074000 > Out: serial@80074000 > Err: serial@80074000 > Net: eth0: ethernet@800f0000 > Hit any key to stop autoboot: 0 > > Signed-off-by: Lukasz Majewski <lu...@denx.de> > --- > arch/arm/dts/imx28-btt3-0-u-boot.dtsi | 7 + > arch/arm/dts/imx28-btt3-1-u-boot.dtsi | 7 + > arch/arm/dts/imx28-btt3-2-u-boot.dtsi | 7 + > arch/arm/dts/imx28-btt3-u-boot.dtsi | 90 ++++++ > arch/arm/mach-imx/mxs/Kconfig | 6 + > board/liebherr/btt/Kconfig | 24 ++ > board/liebherr/btt/MAINTAINERS | 6 + > board/liebherr/btt/Makefile | 9 + > board/liebherr/btt/README | 11 +
This needs to be under doc/board/ somewhere (and please make sure that 'make htmldocs KDOC_WERROR=1' passes), thanks. The rest of this looks reasonable, especially if we shouldn't more generically change where / when we call initf_malloc. -- Tom
signature.asc
Description: PGP signature
