The pinecube has an ethernet connector which uses the EMAC and internal PHY of the chip. Enable it in the config.
Signed-off-by: Paul Kocialkowski <cont...@paulk.fr> --- configs/pinecube_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig index ea40d227bd53..2741e7ed9079 100644 --- a/configs/pinecube_defconfig +++ b/configs/pinecube_defconfig @@ -7,13 +7,13 @@ CONFIG_DRAM_CLK=504 CONFIG_DRAM_ODT_EN=y # CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SPL_I2C=y -CONFIG_NO_NET=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 CONFIG_MTD=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SUN8I_EMAC=y CONFIG_AXP209_POWER=y CONFIG_AXP_DCDC2_VOLT=1250 CONFIG_AXP_DCDC3_VOLT=3300 -- 2.49.0
