[PATCH v2 1/6] drivers: ddr: altera: Add DRAM size checking for arria10

[Naresh Kumar Ravulapalli]

Add DRAM size checking compare between size from device tree and actual
hardware.

Display warning message if DRAM size mismatch between device tree and
actual hardware. Use DRAM size from hardware if device tree value is
greater than actual hardware value.

Signed-off-by: Naresh Kumar Ravulapalli <nareshkumar.ravulapa...@altera.com>
---
 drivers/ddr/altera/sdram_arria10.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/ddr/altera/sdram_arria10.c 
b/drivers/ddr/altera/sdram_arria10.c
index d3305a6c82d..088dc1cb33f 100644
--- a/drivers/ddr/altera/sdram_arria10.c
+++ b/drivers/ddr/altera/sdram_arria10.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ * Copyright (C) 2025 Altera Corporation <www.altera.com>
  */
 
 #include <cpu_func.h>
@@ -702,6 +703,19 @@ int ddr_calibration_sequence(void)
        /* setup the dram info within bd */
        dram_init_banksize();
 
+       if (gd->ram_size != gd->bd->bi_dram[0].size) {
+               printf("DDR: Warning: DRAM size from device tree (%ld MiB)\n",
+                      gd->bd->bi_dram[0].size >> 20);
+               printf(" mismatch with hardware (%ld MiB).\n",
+                      gd->ram_size >> 20);
+       }
+
+       if (gd->bd->bi_dram[0].size > gd->ram_size) {
+               printf("DDR: Warning: DRAM size from device tree > hardware 
size.\n");
+               printf("Hence, initializing DRAM size to hardware DRAM 
size.\n");
+               gd->bd->bi_dram[0].size = gd->ram_size;
+       }
+
        if (of_sdram_firewall_setup(gd->fdt_blob))
                puts("FW: Error Configuring Firewall\n");
 
-- 
2.35.3