Hi Aneesh, Le 09/06/2011 13:24, Aneesh V a écrit : > Fix build breaks for OMAP boards. > All the build breaks were due to couple of missing > defines in the config file, namely: > > CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR > > They have been fixed by providing the right SDRAM > base address and by using SRAM base as the initial > stack address. > > None of these have been tested as I do not have any of > these boards. > > V2: > * Replaced the magic number used for CONFIG_SYS_INIT_SP_ADDR > with a symbolic name - PHYS_SRAM - indicating that SRAM is > used for the intial stack. Made this change in all the > patches. > V3: > * Missed doing the V2 change for omap1610inn. Fixed that > > Aneesh V (6): > omap1610h2: fix build breaks > omap5912osk: fix build breaks > omap1510inn: fix build breaks > omap1610inn: fix build breaks > omap2420h4: fix build breaks > omap730p2: fix build breaks > > include/configs/omap1510inn.h | 5 +++++ > include/configs/omap1610h2.h | 5 +++++ > include/configs/omap1610inn.h | 5 +++++ > include/configs/omap2420h4.h | 4 ++++ > include/configs/omap5912osk.h | 5 +++++ > include/configs/omap730p2.h | 5 +++++ > 6 files changed, 29 insertions(+), 0 deletions(-)
Hmm, seems like they don't apply cleanly above current u-boot-arm/master. Can you rebase and resend as V4 ? Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
