Commits [1] and [2] broke the booting of the BSH SMM S2 board. The
patches in this series restore proper booting.
[1] 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
[2] dda454e933c6 ("serial: mxc: Support bulk enabling clocks")
Changes in v3:
- Drop patch 4/4 "serial: mxc: restore booting for imx8mn_bsh_smm_s2"
- Add patch 4/5 "board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge
CONFIG_SPL_SYS_MALLOC_F_LEN"
- Add patch 5/5 "board: bsh: imx8mn_bsh_smm_s2/s2pro: let clock system
enable UART clock"
Dario Binacchi (5):
spl: Kconfig: support U-Boot load from raw NAND
imx: spl_imx_romapi: support raw NAND sector
configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND
board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge
CONFIG_SPL_SYS_MALLOC_F_LEN
board: bsh: imx8mn_bsh_smm_s2/s2pro: let clock system enable UART
clock
arch/arm/mach-imx/spl_imx_romapi.c | 8 +++-----
board/bsh/imx8mn_smm_s2/spl.c | 2 --
common/spl/Kconfig | 15 +++++++++++++++
configs/imx8mn_bsh_smm_s2_defconfig | 3 ++-
configs/imx8mn_bsh_smm_s2pro_defconfig | 1 -
5 files changed, 20 insertions(+), 9 deletions(-)
--
2.43.0
base-commit: eeb5ff1a468b2303efa9deb2483b5edbebb568c6
branch: bsh-s2-break
