LEDA needs to be at level 0 to enable HUB_3V3
Signed-off-by: Eric Bénard <e...@eukrea.com>
---
board/ti/beagle/beagle.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ab50514..7509916 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -299,7 +299,10 @@ int misc_init_r(void)
setenv(expansion_config.env_var, expansion_config.env_setting);
twl4030_power_init();
- twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+ if (get_board_revision() < REVISION_C4)
+ twl4030_led_init(TWL4030_LED_LEDEN_LEDBON); /* Enable HUB PWR */
+ else
+ twl4030_led_init(TWL4030_LED_LEDEN_LEDAON |
TWL4030_LED_LEDEN_LEDBON);
/* Configure GPIOs to output */
writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
