[PATCH v1 1/1] gpio: msm_gpio: return correct value for gpio read

[Aswin Murugan]

In the current implementation, the GPIO read operation considers
both the input and outbut bits (bits 0 and 1). It should only consider
the state of input bit, i.e bit 0. To address this, mask input bit
alone and read it.

Signed-off-by: Aswin Murugan <aswin.muru...@oss.qualcomm.com>
---
 drivers/gpio/msm_gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/msm_gpio.c b/drivers/gpio/msm_gpio.c
index 6783fc756f4..7de332c66ae 100644
--- a/drivers/gpio/msm_gpio.c
+++ b/drivers/gpio/msm_gpio.c
@@ -202,7 +202,7 @@ static int msm_gpio_get_value(struct udevice *dev, unsigned 
int gpio)
        if (qcom_is_special_pin(priv->pin_data, gpio))
                return msm_gpio_get_value_special(priv, gpio);
 
-       return !!(readl(priv->base + GPIO_IN_OUT_REG(dev, gpio)) >> GPIO_IN);
+       return !!(readl(priv->base + GPIO_IN_OUT_REG(dev, gpio)) & 
BIT(GPIO_IN));
 }
 
 static int msm_gpio_get_function_special(struct msm_gpio_bank *priv,
-- 
2.34.1