On 5/1/25 3:04 AM, Simon Glass wrote:
Since exfat has its own byteorder functions we need to be careful about
including the normal U-Boot byteorder headers in code included by exfat.
...
net: Use a forward declaration for cmd_tbl in net-common.h
congatec: Include env.h to permit reading the environment
dhelectronics: Include env.h to permit reading the environment
imx8ulp_evk: Include env.h to permit reading the environment
venice: Include env.h to permit reading the environment
phytec: Include env.h to permit reading the environment
ronetix: Include env.h to permit reading the environment
toradex: Include env.h to permit reading the environment
advantech: Include env.h in imx8qm_dmsse20_a1
tegra: Include env.h to permit reading the environment
synology: Include env.h to permit reading the environment
amlogic: Include env.h to permit reading the environment
freescale: Include env.h to permit reading the environment
google: Include env.h to permit reading the environment
liebherr: Include env.h to permit reading the environment
technexion: Include env.h to permit reading the environment
elf: Only use network environment-variables if net enabled
net: Include byteorder in net6.h
net: Include string.h in net-legacy.h
net: Include env.h in pcap.c
net: dc2114x: Include env.h to permit reading the environment
net: Move env_get_ip() out of the header file
arch/arm/mach-tegra/dt-setup.c | 1 +
board/Synology/ds414/ds414.c | 1 +
.../imx8qm_dmsse20_a1/imx8qm_dmsse20_a1.c | 1 +
board/amlogic/jethub-j100/jethub-j100.c | 1 +
board/congatec/cgtqmx8/cgtqmx8.c | 3 +-
board/dhelectronics/common/dh_common.c | 1 +
board/freescale/imx8ulp_evk/imx8ulp_evk.c | 1 +
board/freescale/mx7dsabresd/mx7dsabresd.c | 1 +
board/gateworks/venice/venice.c | 1 +
board/google/chameleonv3/board.c | 2 +
board/liebherr/xea/xea.c | 1 +
.../common/phytec_som_detection_blocks.c | 1 +
board/ronetix/imx8mq-cm/imx8mq_cm.c | 1 +
board/technexion/pico-imx7d/pico-imx7d.c | 1 +
board/toradex/colibri_imx7/colibri_imx7.c | 1 +
board/toradex/verdin-imx8mm/verdin-imx8mm.c | 2 +-
cmd/elf.c | 41 ++++++++++---------
drivers/net/dc2114x.c | 1 +
include/net-common.h | 9 ++--
include/net-legacy.h | 1 +
include/net6.h | 1 +
net/net-common.c | 6 +++
net/pcap.c | 1 +
23 files changed, 53 insertions(+), 27 deletions(-)
There are no fs changes in this series , what does this series have to
do with exfat ?
