Hi Aneesh, Le 07/06/2011 17:13, Aneesh V a écrit : > Fix build breaks for OMAP boards. > All the build breaks were due to couple of missing > defines in the config file, namely: > > CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR > > They have been fixed by providing the right SDRAM > base address and by using SRAM base as the initial > stack address. > > None of these have been tested as I do not have any of > these boards. > > Aneesh V (6): > omap1610h2: fix build breaks > omap5912osk: fix build breaks > omap1510inn: fix build breaks > omap1610inn: fix build breaks > omap2420h4: fix build breaks > omap730p2: fix build breaks > > include/configs/omap1510inn.h | 3 +++ > include/configs/omap1610h2.h | 3 +++ > include/configs/omap1610inn.h | 3 +++ > include/configs/omap2420h4.h | 3 +++ > include/configs/omap5912osk.h | 3 +++ > include/configs/omap730p2.h | 3 +++ > 6 files changed, 18 insertions(+), 0 deletions(-)
Could you post a V2 series with a symbolic constant rather than a magic number for SP? Something like: ... #define PHYS_SRAM 0x20000000 ... #define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM ... so that readers of the code know exactly that SP is set to SRAM base. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
