Handle boot for the 3 instance of MMC and call the command stm32prog
for serial boot on USB or on UART as it is done for other STM32MP platform.
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chot...@foss.st.com>
---
include/configs/stm32mp25_common.h | 77 ++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/include/configs/stm32mp25_common.h
b/include/configs/stm32mp25_common.h
index ec980eea856..542de8f068d 100644
--- a/include/configs/stm32mp25_common.h
+++ b/include/configs/stm32mp25_common.h
@@ -21,4 +21,81 @@
*/
#define CFG_SYS_BOOTMAPSZ SZ_256M
+/*****************************************************************************/
+#ifdef CONFIG_DISTRO_DEFAULTS
+/*****************************************************************************/
+
+#ifdef CONFIG_CMD_MMC
+#define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0)
+#define BOOT_TARGET_MMC1(func) func(MMC, mmc, 1)
+#define BOOT_TARGET_MMC2(func) func(MMC, mmc, 2)
+#else
+#define BOOT_TARGET_MMC0(func)
+#define BOOT_TARGET_MMC1(func)
+#define BOOT_TARGET_MMC2(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_MMC1(func) \
+ BOOT_TARGET_MMC0(func) \
+ BOOT_TARGET_MMC2(func)
+
+/*
+ * default bootcmd for stm32mp25:
+ * for serial/usb: execute the stm32prog command
+ * for mmc boot (eMMC, SD card), distro boot on the same mmc device
+ * for other boot, use the default distro order in ${boot_targets}
+ */
+#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
+ "echo \"Boot over ${boot_device}${boot_instance}!\";" \
+ "if test ${boot_device} = serial || test ${boot_device} = usb;" \
+ "then stm32prog ${boot_device} ${boot_instance}; " \
+ "else " \
+ "run env_check;" \
+ "if test ${boot_device} = mmc;" \
+ "then env set boot_targets \"mmc${boot_instance}\"; fi;" \
+ "run distro_bootcmd;" \
+ "fi;\0"
+
+#ifndef STM32MP_BOARD_EXTRA_ENV
+#define STM32MP_BOARD_EXTRA_ENV
+#endif
+
+#define STM32MP_EXTRA \
+ "env_check=if env info -p -d -q; then env save; fi\0" \
+ "boot_net_usb_start=true\0"
+/*
+ * memory layout for 96MB uncompressed/compressed kernel,
+ * 1M fdt, 1M script, 1M pxe and 1M for overlay
+ * and the ramdisk at the end.
+ */
+#define __KERNEL_COMP_ADDR_R __stringify(0x84000000)
+#define __KERNEL_COMP_SIZE_R __stringify(0x04000000)
+#define __KERNEL_ADDR_R __stringify(0x8a000000)
+#define __FDT_ADDR_R __stringify(0x90000000)
+#define __SCRIPT_ADDR_R __stringify(0x90100000)
+#define __PXEFILE_ADDR_R __stringify(0x90200000)
+#define __FDTOVERLAY_ADDR_R __stringify(0x90300000)
+#define __RAMDISK_ADDR_R __stringify(0x90400000)
+
+#define STM32MP_MEM_LAYOUT \
+ "kernel_addr_r=" __KERNEL_ADDR_R "\0" \
+ "fdt_addr_r=" __FDT_ADDR_R "\0" \
+ "scriptaddr=" __SCRIPT_ADDR_R "\0" \
+ "pxefile_addr_r=" __PXEFILE_ADDR_R "\0" \
+ "fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \
+ "ramdisk_addr_r=" __RAMDISK_ADDR_R "\0" \
+ "kernel_comp_addr_r=" __KERNEL_COMP_ADDR_R "\0" \
+ "kernel_comp_size=" __KERNEL_COMP_SIZE_R "\0"
+
+#include <config_distro_bootcmd.h>
+#define CFG_EXTRA_ENV_SETTINGS \
+ STM32MP_MEM_LAYOUT \
+ STM32MP_BOOTCMD \
+ BOOTENV \
+ STM32MP_EXTRA \
+ STM32MP_BOARD_EXTRA_ENV
+
+#endif
+
#endif /* __CONFIG_STM32MP25_COMMMON_H */
--
2.25.1
