Dear Roy Zang, In message <[email protected]> you wrote: > The P1023RDS board is the reference board for the P1023 SoC. > > Add support for booting it from NOR or NAND, with fixed 2G of DDR, PCIe, > UART, I2C, etc.
Please fix the checkpatch warnings (7 lines over 80 characters) ... > +/* ECC will be enabled based on perf_mode environment variable */ > +#undef CONFIG_DDR_ECC ... > +#undef CONFIG_CLOCKS_IN_MHZ ... > +#undef CONFIG_SYS_RAMBOOT ... > +#undef CONFIG_SERIAL_SOFTWARE_FIFO ... > +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ ... > +#undef CONFIG_WATCHDOG /* watchdog disabled */ ... > +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ etc. Please do not undef what is not defined in the first place. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Real Programmers always confuse Christmas and Halloween because OCT 31 == DEC 25 ! - Andrew Rutherford ([email protected]) _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
