Information about setting $fdtfile is covered by generic U-Boot docs. Drop the redundant section.
Signed-off-by: E Shattow <e...@freeshell.de> --- doc/board/starfive/milk-v_mars.rst | 18 ------------------ doc/board/starfive/pine64_star64.rst | 16 ---------------- doc/board/starfive/visionfive2.rst | 18 ------------------ 3 files changed, 52 deletions(-) diff --git a/doc/board/starfive/milk-v_mars.rst b/doc/board/starfive/milk-v_mars.rst index 554932ecfd4..9cfd5d7bddd 100644 --- a/doc/board/starfive/milk-v_mars.rst +++ b/doc/board/starfive/milk-v_mars.rst @@ -39,24 +39,6 @@ Now build the U-Boot SPL and U-Boot proper. This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well as the FIT image (u-boot.itb) with OpenSBI and U-Boot. -Device-tree selection -~~~~~~~~~~~~~~~~~~~~~ - -Depending on the board version U-Boot set variable $fdtfile to either -starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or -starfive/jh7110-starfive-visionfive-2-v1.3b.dtb. - -To overrule this selection the variable can be set manually and saved in the -environment - -:: - - setenv fdtfile my_device-tree.dtb - env save - -or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to -provide a default value. - Boot source selection ~~~~~~~~~~~~~~~~~~~~~ diff --git a/doc/board/starfive/pine64_star64.rst b/doc/board/starfive/pine64_star64.rst index 52e9a907917..1fdd1660a31 100644 --- a/doc/board/starfive/pine64_star64.rst +++ b/doc/board/starfive/pine64_star64.rst @@ -39,22 +39,6 @@ Now build the U-Boot SPL and U-Boot proper. This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well as the FIT image (u-boot.itb) with OpenSBI and U-Boot. -Device-tree selection -~~~~~~~~~~~~~~~~~~~~~ - -U-Boot will set variable $fdtfile to starfive/jh7110-pine64-star64.dtb. - -To overrule this selection the variable can be set manually and saved in the -environment - -:: - - env set fdtfile my_device-tree.dtb - env save - -or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to set to -provide a default value. - Boot source selection ~~~~~~~~~~~~~~~~~~~~~ diff --git a/doc/board/starfive/visionfive2.rst b/doc/board/starfive/visionfive2.rst index 2c68df3ce4d..abda8ac21bc 100644 --- a/doc/board/starfive/visionfive2.rst +++ b/doc/board/starfive/visionfive2.rst @@ -71,24 +71,6 @@ Now build the U-Boot SPL and U-Boot proper This will generate the U-Boot SPL image (spl/u-boot-spl.bin.normal.out) as well as the FIT image (u-boot.itb) with OpenSBI and U-Boot. -Device-tree selection -~~~~~~~~~~~~~~~~~~~~~ - -Depending on the board version U-Boot set variable $fdtfile to either -starfive/jh7110-starfive-visionfive-2-v1.2a.dtb or -starfive/jh7110-starfive-visionfive-2-v1.3b.dtb. - -To overrule this selection the variable can be set manually and saved in the -environment - -:: - - setenv fdtfile my_device-tree.dtb - env save - -or the configuration variable CONFIG_DEFAULT_FDT_FILE can be used to provide -a default value. - Flashing ~~~~~~~~ -- 2.49.0
