suen3 and suen8 were in first HW version quite different, but
now they are from a u-boot point of view similar. So these
two boards can use the same header file. Other keymile boards
differ only in the usage of the PCI interface. Therefore
a target km_kirkwood_pci was introduced. All targets use
the same header file.
Signed-off-by: Holger Brunck <holger.bru...@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com>
cc: Prafulla Wadaskar <prafu...@marvell.com>
cc: Heiko Schocher <h...@denx.de>
---
MAINTAINERS | 3 +-
MAKEALL | 2 +-
boards.cfg | 4 +-
include/configs/{suen3.h => km_kirkwood.h} | 23 +++++++-----
include/configs/suen8.h | 55 ----------------------------
5 files changed, 17 insertions(+), 70 deletions(-)
rename include/configs/{suen3.h => km_kirkwood.h} (79%)
delete mode 100644 include/configs/suen8.h
diff --git a/MAINTAINERS b/MAINTAINERS
index c93a858..f8dea86 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -728,6 +728,7 @@ Sergey Lapin <sla...@ossfans.org>
Valentine Longchamp <valentin.longch...@keymile.com>
+ km_kirkwood ARM926EJS (Kirkwood SoC)
portl2 ARM926EJS (Kirkwood SoC)
Nishanth Menon <n...@ti.com>
@@ -818,8 +819,6 @@ Heiko Schocher <h...@denx.de>
magnesium i.MX27
mgcoge3un ARM926EJS (Kirkwood SoC)
- suen3 ARM926EJS (Kirkwood SoC)
- suen8 ARM926EJS (Kirkwood SoC)
Robert Schwebel <r.schwe...@pengutronix.de>
diff --git a/MAKEALL b/MAKEALL
index 240ca35..3f92449 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -347,6 +347,7 @@ LIST_ARM9=" \
guruplug \
imx27lite \
jadecpu \
+ km_kirkwood \
lpd7a400 \
magnesium \
mv88f6281gtw_ge \
@@ -374,7 +375,6 @@ LIST_ARM9=" \
spear310 \
spear320 \
spear600 \
- suen3 \
trab \
VCMA9 \
versatile \
diff --git a/boards.cfg b/boards.cfg
index b21b047..649f1af 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -106,8 +106,8 @@ davinci_dvevm arm arm926ejs dvevm
davinci
davinci_schmoogie arm arm926ejs schmoogie
davinci davinci
davinci_sffsdr arm arm926ejs sffsdr
davinci davinci
davinci_sonata arm arm926ejs sonata
davinci davinci
-suen3 arm arm926ejs km_arm
keymile kirkwood
-suen8 arm arm926ejs km_arm
keymile kirkwood
+km_kirkwood arm arm926ejs km_arm
keymile kirkwood km_kirkwood:KM_DISABLE_PCI
+km_kirkwood_pci arm arm926ejs km_arm
keymile kirkwood km_kirkwood
mgcoge3un arm arm926ejs km_arm
keymile kirkwood
portl2 arm arm926ejs km_arm
keymile kirkwood
guruplug arm arm926ejs -
Marvell kirkwood
diff --git a/include/configs/suen3.h b/include/configs/km_kirkwood.h
similarity index 79%
rename from include/configs/suen3.h
rename to include/configs/km_kirkwood.h
index 7f6e95f..e51b270 100644
--- a/include/configs/suen3.h
+++ b/include/configs/km_kirkwood.h
@@ -6,6 +6,9 @@
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, s...@denx.de.
*
+ * (C) Copyright 2011
+ * Holger Brunck, Keymile GmbH Hannover, holger.bru...@keymile.de
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -30,8 +33,8 @@
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
*/
-#ifndef _CONFIG_SUEN3_H
-#define _CONFIG_SUEN3_H
+#ifndef _CONFIG_KM_KIRKWOOD_H
+#define _CONFIG_KM_KIRKWOOD_H
/* include common defines/options for all arm based Keymile boards */
#include "km/km_arm.h"
@@ -39,16 +42,16 @@
/*
* Version number information
*/
-#define CONFIG_IDENT_STRING "\nKeymile SUEN3"
+#ifdef CONFIG_KM_DISABLE_PCI
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
+#undef CONFIG_KIRKWOOD_PCIE_INIT
+#else
+#define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
+#endif
-#define CONFIG_HOSTNAME suen3
+#define CONFIG_HOSTNAME km_kirkwood
#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
-/*
- * PCIe port not used on suen8
- */
-#undef CONFIG_KIRKWOOD_PCIE_INIT
-
-#endif /* _CONFIG_SUEN3_H */
+#endif /* _CONFIG_KM_KIRKWOOD */
diff --git a/include/configs/suen8.h b/include/configs/suen8.h
deleted file mode 100644
index d3d9b5c..0000000
--- a/include/configs/suen8.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafu...@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, s...@denx.de.
- *
- * (C) Copyright 2010-2011
- * Holger Brunck, Keymile GmbH Hannover, holger.bru...@keymile.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/* for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
-
-#ifndef _CONFIG_SUEN8_H
-#define _CONFIG_SUEN8_H
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nKeymile SUEN8"
-
-#define CONFIG_HOSTNAME suen8
-
-#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
-#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
-
-/*
- * PCIe port not used on suen8
- */
-#undef CONFIG_KIRKWOOD_PCIE_INIT
-
-#endif /* _CONFIG_SUEN8_H */
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
