siemens have some defconfigs for different hardware versions, all based on mainline cxg3 board. For easier updating the downstream defconfigs, move common settings into new file.
configs/imx8qxp_capricorn.config Signed-off-by: Heiko Schocher <h...@denx.de> Signed-off-by: Walter Schweizer <walter.schwei...@siemens.com> --- board/siemens/capricorn/MAINTAINERS | 1 + configs/capricorn_cxg3_defconfig | 132 +-------------------------- configs/imx8qxp_capricorn.config | 135 ++++++++++++++++++++++++++++ 3 files changed, 140 insertions(+), 128 deletions(-) create mode 100644 configs/imx8qxp_capricorn.config diff --git a/board/siemens/capricorn/MAINTAINERS b/board/siemens/capricorn/MAINTAINERS index 5f467aa9b6e..3b4bd64dd00 100644 --- a/board/siemens/capricorn/MAINTAINERS +++ b/board/siemens/capricorn/MAINTAINERS @@ -9,4 +9,5 @@ F: arch/arm/dts/imx8-capricorn-u-boot.dtsi F: arch/arm/dts/imx8-capricorn.dtsi F: board/siemens/capricorn/ F: configs/capricorn_cxg3_defconfig +F: configs/imx8qxp_capricorn.config F: include/configs/capricorn-common.h diff --git a/configs/capricorn_cxg3_defconfig b/configs/capricorn_cxg3_defconfig index 3cc46067f7d..530b1f47695 100644 --- a/configs/capricorn_cxg3_defconfig +++ b/configs/capricorn_cxg3_defconfig @@ -1,117 +1,13 @@ -CONFIG_ARM=y -CONFIG_ARCH_IMX8=y -CONFIG_TEXT_BASE=0x80020000 -CONFIG_SYS_MALLOC_LEN=0x2800000 -CONFIG_SYS_MALLOC_F_LEN=0x4000 -CONFIG_SPL_GPIO=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=3 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x200000 -CONFIG_DM_GPIO=y +#include <configs/imx8qxp_capricorn.config> + CONFIG_DEFAULT_DEVICE_TREE="imx8-capricorn-cxg3" -CONFIG_TARGET_CAPRICORN=y -CONFIG_SPL_MMC=y -CONFIG_SPL_SERIAL=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x13e000 -CONFIG_SPL_TEXT_BASE=0x100000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x128000 -CONFIG_SPL_BSS_MAX_SIZE=0x1000 -CONFIG_SYS_BOOTM_LEN=0x800000 -CONFIG_SYS_LOAD_ADDR=0x80280000 -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0x202000 CONFIG_IDENT_STRING=" ##v01.06" -CONFIG_REMAKE_ELF=y -# CONFIG_EFI_LOADER is not set -CONFIG_FIT=y -CONFIG_FIT_EXTERNAL_OFFSET=0x3000 -CONFIG_BOOTDELAY=3 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" -CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -CONFIG_AUTOBOOT_KEYED_CTRLC=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_SYSTEM_SETUP=y -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;" -CONFIG_SYS_CBSIZE=2048 -CONFIG_SYS_PBSIZE=2073 -CONFIG_LOG=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_MAX_SIZE=0x1f000 -CONFIG_SPL_BOARD_INIT=y -# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set -CONFIG_SPL_LOAD_IMX_CONTAINER=y -CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_HAVE_INIT_STACK=y -CONFIG_SPL_SYS_MALLOC=y -CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y -CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 -CONFIG_SPL_SYS_MALLOC_SIZE=0x4000 -CONFIG_SPL_SYS_MMCSD_RAW_MODE=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040 -CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_WATCHDOG=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="U-Boot# " -CONFIG_CMD_CPU=y -# CONFIG_BOOTM_NETBSD is not set -# CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_IMPORTENV is not set -# CONFIG_CMD_CRC32 is not set -CONFIG_CMD_CLK=y -CONFIG_CMD_DM=y -CONFIG_CMD_FUSE=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_READ=y -CONFIG_CMD_WDT=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_EXT4=y -CONFIG_CMD_FAT=y -CONFIG_CMD_FS_GENERIC=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_MMC_ENV_PART=2 + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y CONFIG_USE_ETHPRIME=y CONFIG_ETHPRIME="eth1" CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_ENV=y -CONFIG_BOOTCOUNT_ALTBOOTCMD="run bootcmd" -CONFIG_SPL_CLK=y -CONFIG_CLK_IMX8=y -CONFIG_CPU=y -CONFIG_MXC_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_IMX_LPI2C=y -CONFIG_LED=y -CONFIG_LED_GPIO=y -CONFIG_MISC=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_MMC_IO_VOLTAGE=y -CONFIG_MMC_UHS_SUPPORT=y -CONFIG_MMC_HS400_SUPPORT=y -CONFIG_FSL_USDHC=y -CONFIG_PHYLIB=y + CONFIG_MV88E61XX_SWITCH=y CONFIG_MV88E61XX_CPU_PORT=5 CONFIG_MV88E61XX_PHY_PORTS=0x7 @@ -119,23 +15,3 @@ CONFIG_DM_ETH_PHY=y CONFIG_FEC_MXC_SHARE_MDIO=y CONFIG_FEC_MXC_MDIO_BASE=0x5B050000 CONFIG_FEC_MXC=y -CONFIG_MII=y -CONFIG_PHY=y -CONFIG_NOP_PHY=y -CONFIG_PINCTRL=y -CONFIG_SPL_PINCTRL=y -CONFIG_PINCTRL_IMX8=y -CONFIG_POWER_DOMAIN=y -CONFIG_IMX8_POWER_DOMAIN=y -CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_DM_REGULATOR_GPIO=y -CONFIG_SPL_DM_REGULATOR_GPIO=y -CONFIG_DM_SERIAL=y -CONFIG_FSL_LPUART=y -CONFIG_DM_THERMAL=y -CONFIG_IMX_SCU_THERMAL=y -# CONFIG_WATCHDOG is not set -CONFIG_WDT=y -CONFIG_WDT_SIEMENS_PMIC=y -CONFIG_SPL_TINY_MEMSET=y diff --git a/configs/imx8qxp_capricorn.config b/configs/imx8qxp_capricorn.config new file mode 100644 index 00000000000..f59f2129d56 --- /dev/null +++ b/configs/imx8qxp_capricorn.config @@ -0,0 +1,135 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMX8=y +CONFIG_TEXT_BASE=0x80020000 +CONFIG_SYS_MALLOC_LEN=0x2800000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL_GPIO=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=3 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0x200000 +CONFIG_ENV_OFFSET_REDUND=0x202000 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_MMC_ENV_PART=2 + +CONFIG_DM_GPIO=y + +CONFIG_TARGET_CAPRICORN=y +CONFIG_SPL_MMC=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL_STACK=0x13e000 +CONFIG_SPL_TEXT_BASE=0x100000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x128000 +CONFIG_SPL_BSS_MAX_SIZE=0x1000 +CONFIG_SYS_BOOTM_LEN=0x4000000 +CONFIG_SYS_LOAD_ADDR=0x80280000 +CONFIG_SPL=y + +CONFIG_REMAKE_ELF=y +# CONFIG_EFI_LOADER is not set +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 +CONFIG_BOOTDELAY=3 +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" +CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" +CONFIG_AUTOBOOT_KEYED_CTRLC=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="if usrbutton; then run flash_self_test; reset; fi;run flash_self;reset;" +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2073 +CONFIG_LOG=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SPL_MAX_SIZE=0x1f000 +CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set +CONFIG_SPL_LOAD_IMX_CONTAINER=y +CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg" +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SPL_HAVE_INIT_STACK=y +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x4000 +CONFIG_SPL_SYS_MMCSD_RAW_MODE=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040 +CONFIG_SPL_POWER_DOMAIN=y +CONFIG_SPL_WATCHDOG=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="U-Boot# " +CONFIG_CMD_CPU=y +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_CRC32 is not set +# CONFIG_CMD_BIND is not set +CONFIG_CMD_WDT=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DM=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_READ=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y + +CONFIG_SPL_DM=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_BOOTCOUNT_ENV=y +CONFIG_BOOTCOUNT_ALTBOOTCMD="run bootcmd" +CONFIG_SPL_CLK=y +CONFIG_CLK_IMX8=y +CONFIG_CPU=y +CONFIG_MXC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_FSL_USDHC=y +CONFIG_PHYLIB=y + +CONFIG_MII=y +CONFIG_PHY=y +CONFIG_NOP_PHY=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX8=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPL_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_DM_THERMAL=y +CONFIG_IMX_SCU_THERMAL=y +# CONFIG_WATCHDOG is not set +CONFIG_WDT=y +CONFIG_WDT_SIEMENS_PMIC=y +CONFIG_SPL_TINY_MEMSET=y -- 2.20.1
