Hitachi TX10D07VM0BAA is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD). The resolution of a 4" contains 480 x 800
pixels.
Tested-by: Ion Agorria <i...@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com>
---
drivers/video/Kconfig | 8 +
drivers/video/Makefile | 1 +
drivers/video/hitachi-tx10d07vm0baa.c | 304 ++++++++++++++++++++++++++
3 files changed, 313 insertions(+)
create mode 100644 drivers/video/hitachi-tx10d07vm0baa.c
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 73353944971..c2f6a72af42 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -641,6 +641,14 @@ config VIDEO_LCD_TDO_TL070WSH30
Say Y here if you want to enable support for TDO TL070WSH30
1024x600 DSI video mode panel.
+config VIDEO_LCD_HITACHI_TX10D07VM0BAA
+ tristate "Hitachi TX10D07VM0BAA 480x800 MIPI DSI video mode panel"
+ depends on PANEL && BACKLIGHT
+ select VIDEO_MIPI_DSI
+ help
+ Say Y here if you want to enable support for Hitachi TX10D07VM0BAA
+ TFT-LCD module. The panel has a 480x800 resolution.
+
config VIDEO_LCD_HITACHI_TX18D42VM
bool "Hitachi tx18d42vm LVDS LCD panel support"
---help---
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index fbdb058647a..914ae885b70 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_VIDEO_IVYBRIDGE_IGD) += ivybridge_igd.o
obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
obj-$(CONFIG_VIDEO_LCD_ENDEAVORU) += endeavoru-panel.o
obj-$(CONFIG_VIDEO_LCD_HIMAX_HX8394) += himax-hx8394.o
+obj-$(CONFIG_VIDEO_LCD_HITACHI_TX10D07VM0BAA) += hitachi-tx10d07vm0baa.o
obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
obj-$(CONFIG_VIDEO_LCD_LG_LD070WX3) += lg-ld070wx3.o
obj-$(CONFIG_VIDEO_LCD_MOT) += mot-panel.o
diff --git a/drivers/video/hitachi-tx10d07vm0baa.c
b/drivers/video/hitachi-tx10d07vm0baa.c
new file mode 100644
index 00000000000..95b2f7bfc41
--- /dev/null
+++ b/drivers/video/hitachi-tx10d07vm0baa.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hitachi TX10D07VM0BAA DSI panel driver
+ *
+ * Copyright (c) 2024 Svyatoslav Ryhel <clamo...@gmail.com>
+ */
+
+#include <backlight.h>
+#include <dm.h>
+#include <panel.h>
+#include <log.h>
+#include <mipi_dsi.h>
+#include <linux/delay.h>
+#include <power/regulator.h>
+#include <asm/gpio.h>
+
+struct hitachi_tx10d07vm0baa_priv {
+ struct udevice *avci;
+ struct udevice *iovcc;
+
+ struct udevice *backlight;
+
+ struct gpio_desc reset_gpio;
+};
+
+static struct display_timing default_timing = {
+ .pixelclock.typ = 29816000,
+ .hactive.typ = 480,
+ .hfront_porch.typ = 10,
+ .hback_porch.typ = 10,
+ .hsync_len.typ = 10,
+ .vactive.typ = 800,
+ .vfront_porch.typ = 4,
+ .vback_porch.typ = 4,
+ .vsync_len.typ = 4,
+};
+
+#define dsi_generic_write_seq(dsi, cmd, seq...) do { \
+ static const u8 b[] = { cmd, seq }; \
+ int ret; \
+ ret = mipi_dsi_dcs_write_buffer(dsi, b, ARRAY_SIZE(b)); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+static int hitachi_tx10d07vm0baa_enable_backlight(struct udevice *dev)
+{
+ struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+ struct mipi_dsi_device *dsi = plat->device;
+ int ret;
+
+ dsi_generic_write_seq(dsi, MIPI_DCS_SET_PARTIAL_AREA, 0x00,
+ 0x00, 0x03, 0x1f);
+ dsi_generic_write_seq(dsi, MIPI_DCS_SET_SCROLL_AREA, 0x00,
+ 0x00, 0x03, 0x20, 0x00, 0x00);
+
+ dsi_generic_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x0a);
+ dsi_generic_write_seq(dsi, MIPI_DCS_SET_SCROLL_START, 0x00,
+ 0x00);
+
+ ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT);
+ if (ret) {
+ log_debug("%s: failed to set pixel format: %d\n", __func__,
ret);
+ return ret;
+ }
+
+ ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x00);
+ if (ret) {
+ log_debug("%s: failed to set tear scanline: %d\n", __func__,
ret);
+ return ret;
+ }
+
+ dsi_generic_write_seq(dsi, 0x71, 0x00); /* Ex_Vsync_en */
+
+ dsi_generic_write_seq(dsi, 0xb2, 0x00); /* VCSEL */
+ dsi_generic_write_seq(dsi, 0xb4, 0xaa); /* setvgmpm */
+ dsi_generic_write_seq(dsi, 0xb5, 0x33); /* rbias1 */
+ dsi_generic_write_seq(dsi, 0xb6, 0x03); /* rbias2 */
+
+ dsi_generic_write_seq(dsi, 0xb7, 0x1a, 0x33, 0x03, 0x03,
+ 0x03, 0x00, 0x00, 0x01, 0x02, 0x00,
+ 0x00, 0x04, 0x00, 0x01, 0x01, 0x01); /*
set_ddvdhp */
+ dsi_generic_write_seq(dsi, 0xb8, 0x1c, 0x53, 0x03, 0x03,
+ 0x00, 0x01, 0x02, 0x00, 0x00, 0x04,
+ 0x00, 0x01, 0x01); /*
set_ddvdhm */
+
+ dsi_generic_write_seq(dsi, 0xb9, 0x0a, 0x01, 0x01, 0x00,
+ 0x00, 0x00, 0x02, 0x00, 0x02, 0x01); /*
set_vgh */
+ dsi_generic_write_seq(dsi, 0xba, 0x0f, 0x01, 0x01, 0x00,
+ 0x00, 0x00, 0x02, 0x00, 0x02, 0x01); /*
set_vgl */
+ dsi_generic_write_seq(dsi, 0xbb, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x02, 0x01); /*
set_vcl */
+
+ dsi_generic_write_seq(dsi, 0xc1, 0x01); /* number of lines */
+ dsi_generic_write_seq(dsi, 0xc2, 0x08); /* number of fp lines */
+ dsi_generic_write_seq(dsi, 0xc3, 0x04); /* gateset(1) */
+ dsi_generic_write_seq(dsi, 0xc4, 0x4c); /* 1h period */
+ dsi_generic_write_seq(dsi, 0xc5, 0x03); /* source precharge */
+ dsi_generic_write_seq(dsi, 0xc6, 0xc4, 0x04); /* source precharge
timing */
+ dsi_generic_write_seq(dsi, 0xc7, 0x00); /* source level */
+ dsi_generic_write_seq(dsi, 0xc8, 0x02); /* number of bp lines */
+ dsi_generic_write_seq(dsi, 0xc9, 0x10); /* gateset(2) */
+ dsi_generic_write_seq(dsi, 0xca, 0x04, 0x04); /* gateset(3) */
+ dsi_generic_write_seq(dsi, 0xcb, 0x03); /* gateset(4) */
+ dsi_generic_write_seq(dsi, 0xcc, 0x12); /* gateset(5) */
+ dsi_generic_write_seq(dsi, 0xcd, 0x12); /* gateset(6) */
+ dsi_generic_write_seq(dsi, 0xce, 0x30); /* gateset(7) */
+ dsi_generic_write_seq(dsi, 0xcf, 0x30); /* gateset(8) */
+ dsi_generic_write_seq(dsi, 0xd0, 0x40); /* gateset(9) */
+ dsi_generic_write_seq(dsi, 0xd1, 0x22); /* flhw */
+ dsi_generic_write_seq(dsi, 0xd2, 0x22); /* vckhw */
+ dsi_generic_write_seq(dsi, 0xd3, 0x04); /* flt */
+ dsi_generic_write_seq(dsi, 0xd4, 0x14); /* tctrl */
+ dsi_generic_write_seq(dsi, 0xd6, 0x02); /* dotinv */
+ dsi_generic_write_seq(dsi, 0xd7, 0x00); /* on/off sequence
period */
+
+ dsi_generic_write_seq(dsi, 0xd8, 0x01, 0x05, 0x06, 0x0d,
+ 0x18, 0x09, 0x22, 0x23, 0x00); /*
ponseqa */
+ dsi_generic_write_seq(dsi, 0xd9, 0x24, 0x01); /*
ponseqb */
+ dsi_generic_write_seq(dsi, 0xde, 0x09, 0x0f, 0x21, 0x12,
+ 0x04); /*
ponseqc */
+
+ dsi_generic_write_seq(dsi, 0xdf, 0x02, 0x06, 0x06, 0x06,
+ 0x06, 0x00); /*
pofseqa */
+ dsi_generic_write_seq(dsi, 0xe0, 0x01); /*
pofseqb */
+
+ ret = mipi_dsi_dcs_set_display_brightness(dsi, 0xff);
+ if (ret) {
+ log_debug("%s: failed to set display brightness: %d\n",
__func__, ret);
+ return ret;
+ }
+
+ dsi_generic_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x40);
+
+ dsi_generic_write_seq(dsi, 0xe2, 0x00, 0x00); /* cabc pwm */
+ dsi_generic_write_seq(dsi, 0xe3, 0x03); /* cabc */
+ dsi_generic_write_seq(dsi, 0xe4, 0x66, 0x7b, 0x90, 0xa5,
+ 0xbb, 0xc7, 0xe1, 0xe5); /* cabc
brightness */
+ dsi_generic_write_seq(dsi, 0xe5, 0xc5, 0xc5, 0xc9, 0xc9,
+ 0xd1, 0xe1, 0xf1, 0xfe); /* cabc
brightness */
+ dsi_generic_write_seq(dsi, 0xe7, 0x2a); /* cabc */
+ dsi_generic_write_seq(dsi, 0xe8, 0x00); /* brt_rev */
+ dsi_generic_write_seq(dsi, 0xe9, 0x00); /* tefreq */
+
+ dsi_generic_write_seq(dsi, 0xea, 0x01); /* high speed
ram */
+
+ dsi_generic_write_seq(dsi, 0xeb, 0x00, 0x33, 0x0e, 0x15,
+ 0xb7, 0x78, 0x88, 0x0f); /* gamma
setting r pos */
+ dsi_generic_write_seq(dsi, 0xec, 0x00, 0x33, 0x0e, 0x15,
+ 0xb7, 0x78, 0x88, 0x0f); /* gamma
setting r neg */
+ dsi_generic_write_seq(dsi, 0xed, 0x00, 0x33, 0x0e, 0x15,
+ 0xb7, 0x78, 0x88, 0x0f); /* gamma
setting g pos */
+ dsi_generic_write_seq(dsi, 0xee, 0x00, 0x33, 0x0e, 0x15,
+ 0xb7, 0x78, 0x88, 0x0f); /* gamma
setting g neg */
+ dsi_generic_write_seq(dsi, 0xef, 0x00, 0x33, 0x0e, 0x15,
+ 0xb7, 0x78, 0x88, 0x0f); /* gamma
setting b pos */
+ dsi_generic_write_seq(dsi, 0xf0, 0x00, 0x33, 0x0e, 0x15,
+ 0xb7, 0x78, 0x88, 0x0f); /* gamma
setting b neg */
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret) {
+ log_debug("%s: failed to exit sleep mode: %d\n", __func__, ret);
+ return ret;
+ }
+
+ mdelay(110);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret) {
+ log_debug("%s: failed to set display on: %d\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int hitachi_tx10d07vm0baa_set_backlight(struct udevice *dev, int
percent)
+{
+ struct hitachi_tx10d07vm0baa_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = backlight_enable(priv->backlight);
+ if (ret)
+ return ret;
+
+ return backlight_set_brightness(priv->backlight, percent);
+}
+
+static int hitachi_tx10d07vm0baa_timings(struct udevice *dev,
+ struct display_timing *timing)
+{
+ memcpy(timing, &default_timing, sizeof(*timing));
+ return 0;
+}
+
+static int hitachi_tx10d07vm0baa_of_to_plat(struct udevice *dev)
+{
+ struct hitachi_tx10d07vm0baa_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev,
+ "backlight", &priv->backlight);
+ if (ret) {
+ log_debug("%s: cannot get backlight: ret = %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = device_get_supply_regulator(dev, "avci-supply", &priv->avci);
+ if (ret) {
+ log_debug("%s: cannot get avci-supply: ret = %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = device_get_supply_regulator(dev, "iovcc-supply", &priv->iovcc);
+ if (ret) {
+ log_debug("%s: cannot get iovcc-supply: ret = %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = gpio_request_by_name(dev, "reset-gpios", 0,
+ &priv->reset_gpio, GPIOD_IS_OUT);
+ if (ret) {
+ log_debug("%s: cannot decode reset-gpios (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int hitachi_tx10d07vm0baa_hw_init(struct udevice *dev)
+{
+ struct hitachi_tx10d07vm0baa_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = dm_gpio_set_value(&priv->reset_gpio, 1);
+ if (ret) {
+ log_debug("%s: error entering reset (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ ret = regulator_set_enable_if_allowed(priv->iovcc, 1);
+ if (ret) {
+ log_debug("%s: enabling iovcc-supply failed (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = regulator_set_enable_if_allowed(priv->avci, 1);
+ if (ret) {
+ log_debug("%s: enabling avci-supply failed (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ mdelay(25);
+
+ ret = dm_gpio_set_value(&priv->reset_gpio, 0);
+ if (ret) {
+ log_debug("%s: error exiting reset (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ mdelay(5);
+
+ return 0;
+}
+
+static int hitachi_tx10d07vm0baa_probe(struct udevice *dev)
+{
+ struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
+
+ /* fill characteristics of DSI data link */
+ plat->lanes = 2;
+ plat->format = MIPI_DSI_FMT_RGB888;
+ plat->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM;
+
+ return hitachi_tx10d07vm0baa_hw_init(dev);
+}
+
+static const struct panel_ops hitachi_tx10d07vm0baa_ops = {
+ .enable_backlight = hitachi_tx10d07vm0baa_enable_backlight,
+ .set_backlight = hitachi_tx10d07vm0baa_set_backlight,
+ .get_display_timing = hitachi_tx10d07vm0baa_timings,
+};
+
+static const struct udevice_id hitachi_tx10d07vm0baa_ids[] = {
+ { .compatible = "hit,tx10d07vm0baa" },
+ { }
+};
+
+U_BOOT_DRIVER(hitachi_tx10d07vm0baa) = {
+ .name = "hitachi_tx10d07vm0baa",
+ .id = UCLASS_PANEL,
+ .of_match = hitachi_tx10d07vm0baa_ids,
+ .ops = &hitachi_tx10d07vm0baa_ops,
+ .of_to_plat = hitachi_tx10d07vm0baa_of_to_plat,
+ .probe = hitachi_tx10d07vm0baa_probe,
+ .plat_auto = sizeof(struct mipi_dsi_panel_plat),
+ .priv_auto = sizeof(struct hitachi_tx10d07vm0baa_priv),
+};
--
2.43.0
