In the existing behaviour, CMD_BOOTZ is not enabled by default which means zimage.o is not compiled in the SPL in falcon mode unless explicitly enabled. This changes now as SPL_BOOTZ is default y which leads to larger SPL size with zimage.o being present.
This patch modifies the defconfigs that used falcon mode but don't require zimage support. Signed-off-by: Anshul Dalal <ansh...@ti.com> --- configs/imx28_xea_defconfig | 1 + configs/imx6qdl_icore_mipi_defconfig | 1 + configs/imx6qdl_icore_mmc_defconfig | 1 + configs/imx6qdl_icore_rqs_defconfig | 1 + 4 files changed, 4 insertions(+) diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index 38282e6ea92..cbd5a788c64 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -128,3 +128,4 @@ CONFIG_DM_SPI=y CONFIG_MXS_SPI=y CONFIG_SPL_CRC8=y # CONFIG_SPL_OF_LIBFDT is not set +CONFIG_SPL_BOOTZ=n diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index cf4c2d9c6f1..6d556c5fab7 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -74,3 +74,4 @@ CONFIG_PINCTRL_IMX6=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y +CONFIG_SPL_BOOTZ=n diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index fb0787d1beb..f5a1ad0dde7 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -101,3 +101,4 @@ CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y CONFIG_IMX_WATCHDOG=y +CONFIG_SPL_BOOTZ=n diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index 49feb1af830..e12757545e6 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -71,3 +71,4 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y +CONFIG_SPL_BOOTZ=n -- 2.49.0
