Hi Wolfgang Denk, The actual initialisation of the sensor is in the OS. But, I need an early access to get/set the information in the OTP registers of the sensor.
Regards, john On Mon, Jun 6, 2011 at 1:11 PM, Wolfgang Denk <w...@denx.de> wrote: > Dear John Tobias, > > In message <banlktimzdponq5vquluvnqnurf85vti...@mail.gmail.com> you wrote: > > > > That's correct! I should elaborate it. It should be (Serial Camera > Control > > Bus) protocol developed by omnivision. > > I am using a OV2715 sensor and I need to access the registers of the said > > sensor, I have to modify the I2C read/write in uboot to support the SCCB > > transactions. > > Which exact operations do you need to perform in U-Boot? > > I would expect that initializing a camera controller (which is > probably not used in any parts of U-Boot code) should rathe rbe done > in the OS device driver. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de > Murder is contrary to the laws of man and God. > -- M-5 Computer, "The Ultimate Computer", stardate 4731.3 >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
