On 07/04/2025 18:59, Stephan Gerhold wrote:
This is broken ever since we switched to using U-Boot as first stage
bootloader. Since no one seems to test this actively, let's just drop this
entirely. There are other tools available for re-flashing the DB410c.
Signed-off-by: Stephan Gerhold <stephan.gerh...@linaro.org>
---
board/qualcomm/dragonboard410c/dragonboard410c.env | 26 ----------------------
1 file changed, 26 deletions(-)
diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.env
b/board/qualcomm/dragonboard410c/dragonboard410c.env
index
9d9a575a0c3f7a4739e4fb77a980d742e10510f5..57a30031f743f43d4a6389286b426b404d2f371b
100644
--- a/board/qualcomm/dragonboard410c/dragonboard410c.env
+++ b/board/qualcomm/dragonboard410c/dragonboard410c.env
@@ -1,30 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0+ */
-
-/* Does what recovery does */
-#define REFLASH(file, partnum) \
-part start mmc 0 partnum start && \
-part size mmc 0 partnum size && \
-tftp $loadaddr file && \
-mmc write $loadaddr $start $size &&
-
-reflash=
-mmc dev 0 &&
-usb start &&
-dhcp &&
-tftp $loadaddr dragonboard/rescue/gpt_both0.bin &&
-mmc write $loadaddr 0 43 &&
-mmc rescan &&
-REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)
-REFLASH(dragonboard/rescue/sbl1.mbn, 2)
-REFLASH(dragonboard/rescue/rpm.mbn, 3)
-REFLASH(dragonboard/rescue/tz.mbn, 4)
-REFLASH(dragonboard/rescue/hyp.mbn, 5)
-REFLASH(dragonboard/rescue/sec.dat, 6)
-REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)
-REFLASH(dragonboard/u-boot.img, 8)
-usb stop &&
-echo Reflash completed
-
loadaddr=0x81000000
initrd_high=0xffffffffffffffff
linux_image=Image
Reviewed-by: Neil Armstrong <neil.armstr...@linaro.org>
