On Wed, 09 Apr 2025 19:17:23 +0200, Caleb Connolly wrote:
> Introduce a new event to signal that the live tree has been built,
> allowing boards to perform fixups on the tree before devices are bound.
> Crucially this allows for devices to be enabled or disabled, but also
> allows for properties that are parsed during the bind stage to be
> modified (such as dr_mode for dwc3).
>
> With this in place, mach-snapdragon is switched over to use the event
> and some hacky U-Boot specific DT overrides (which had to be undone
> prior to booting an image) are removed in favour of fixing up the
> livetree (which is not passed on to further boot stages).
>
> [...]
Applied, thanks!
[1/6] event: signal when livetree has been built
https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/1c057be814e1
[2/6] mach-snapdragon: use EVT_OF_LIVE_INIT to apply DT fixups
https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/f27e9c349b03
[3/6] mach-snapdragon: of_fixup: skip disabled USB nodes
https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/6d81cb1c01bc
[4/6] clk/qcom: qcm2290: show clock name in set_rate()
https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/bd7b4fa55310
[5/6] mach-snapdragon: of_fixup: set dr_mode for RB1/2 boards
https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/dfb173f8080b
[6/6] pinctrl: qcom: qcm2290: fix off by 1 in pin_count
https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/9511f4381bdf
Best regards,
--
Caleb Connolly <caleb.conno...@linaro.org>
