[PATCH 4/6] clk/qcom: qcm2290: show clock name in set_rate()

[Caleb Connolly]

The device name is always clk_qcom... Not very useful.

Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org>
---
 drivers/clk/qcom/clock-qcm2290.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/clock-qcm2290.c b/drivers/clk/qcom/clock-qcm2290.c
index 
1326b770c3ebd723120de4b6657aafac726023d6..fad104fb91aec8917de66b63dd546926c8856011
 100644
--- a/drivers/clk/qcom/clock-qcm2290.c
+++ b/drivers/clk/qcom/clock-qcm2290.c
@@ -87,9 +87,9 @@ static ulong qcm2290_set_rate(struct clk *clk, ulong rate)
 {
        struct msm_clk_priv *priv = dev_get_priv(clk->dev);
        const struct freq_tbl *freq;
 
-       debug("%s: clk %s rate %lu\n", __func__, clk->dev->name, rate);
+       debug("%s: clk %s rate %lu\n", __func__, qcm2290_clks[clk->id].name, 
rate);
 
        switch (clk->id) {
        case GCC_QUPV3_WRAP0_S4_CLK: /*UART2*/
                freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate);

-- 
2.49.0