[PATCH] toradex: apalis-imx6: Fix build failure when CONFIG_VIDEO_IPUV3 is enabled

[rafael]

From: Rafael Beims <rafael.be...@toradex.com>

If CONFIG_VIDEO_IPUV3 is enabled without also having CONFIG_IMX_HDMI
enabled, the build fails for the Apalis iMX6 board.

Fixes: 592f4aed6db7 ("arm: imx: initial support for apalis imx6")
Signed-off-by: Rafael Beims <rafael.be...@toradex.com>
---
 board/toradex/apalis_imx6/apalis_imx6.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/board/toradex/apalis_imx6/apalis_imx6.c 
b/board/toradex/apalis_imx6/apalis_imx6.c
index ec0f223c4aa6..0329563761b4 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -463,10 +463,12 @@ static iomux_v3_cfg_t const rgb_pads[] = {
        MX6_PAD_EIM_D31__IPU1_DISP1_DATA20 | MUX_PAD_CTRL(OUTPUT_RGB),
 };
 
+#ifdef CONFIG_IMX_HDMI
 static void do_enable_hdmi(struct display_info_t const *dev)
 {
        imx_enable_hdmi_phy();
 }
+#endif
 
 static void enable_lvds(struct display_info_t const *dev)
 {
@@ -496,7 +498,9 @@ static int detect_default(struct display_info_t const *dev)
        return 1;
 }
 
-struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {
+#ifdef CONFIG_IMX_HDMI
+{
        .bus    = -1,
        .addr   = 0,
        .pixfmt = IPU_PIX_FMT_RGB24,
@@ -516,7 +520,9 @@ struct display_info_t const displays[] = {{
                .vsync_len      = 10,
                .sync           = FB_SYNC_EXT,
                .vmode          = FB_VMODE_NONINTERLACED
-} }, {
+} },
+#endif
+{
        .bus    = -1,
        .addr   = 0,
        .di     = 1,
@@ -586,7 +592,11 @@ static void setup_display(void)
        int reg;
 
        enable_ipu_clock();
+
+#ifdef CONFIG_IMX_HDMI
        imx_setup_hdmi();
+#endif
+
        /* Turn on LDB0,IPU,IPU DI0 clocks */
        reg = __raw_readl(&mxc_ccm->CCGR3);
        reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
-- 
2.47.2