This patches tidies up a few things in the recently added EFI app for
ARM:
- Use 0 as the value for SYS_LOAD_ADDR
- Reword help for TARGET_EFI_ARM_APP64
- Do the same for x86-app targets, for consistency
- Delete efi-arm_app32 MAINTAINERS entry since there is no such thing
Signed-off-by: Simon Glass <s...@chromium.org>
Suggested-by: Caleb Connolly <caleb.conno...@linaro.org>
---
Kconfig | 2 +-
board/efi/Kconfig | 6 +++---
board/efi/efi-arm_app/MAINTAINERS | 7 -------
3 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/Kconfig b/Kconfig
index 5ffdc481827..589fed689c8 100644
--- a/Kconfig
+++ b/Kconfig
@@ -551,7 +551,7 @@ config SYS_LOAD_ADDR
default 0x12000000 if ARCH_MX6 && !(MX6SL || MX6SLL || MX6SX || MX6UL
|| MX6ULL)
default 0x80800000 if ARCH_MX7
default 0x90000000 if FSL_LSCH2 || FSL_LSCH3
- default 0x02000000 if ARCH_EFI
+ default 0 if ARCH_EFI
default 0x0 if ARCH_SC5XX
help
Address in memory to use as the default safe load address.
diff --git a/board/efi/Kconfig b/board/efi/Kconfig
index 174e6ecd6f4..5237f58093e 100644
--- a/board/efi/Kconfig
+++ b/board/efi/Kconfig
@@ -17,7 +17,7 @@ config TARGET_EFI_X86_APP32
help
This target is used for running U-Boot on top of EFI. In
this case EFI does the early initialisation, and U-Boot
- takes over once the RAM, video and CPU are fully running.
+ starts once the RAM, video and CPU are fully running.
U-Boot is loaded as an application from EFI.
config TARGET_EFI_X86_APP64
@@ -27,7 +27,7 @@ config TARGET_EFI_X86_APP64
help
This target is used for running U-Boot on top of EFI in 64-bit mode.
In this case EFI does the early initialisation, and U-Boot
- takes over once the RAM, video and CPU are fully running.
+ starts once the RAM, video and CPU are fully running.
U-Boot is loaded as an application from EFI.
config TARGET_EFI_X86_PAYLOAD
@@ -59,7 +59,7 @@ config TARGET_EFI_ARM_APP64
help
This target is used for running U-Boot on top of EFI in 64-bit mode.
In this case EFI does the early initialisation, and U-Boot
- takes over once the RAM, video and CPU are fully running.
+ starts once the RAM, video and CPU are fully running.
U-Boot is loaded as an application from EFI.
endchoice
diff --git a/board/efi/efi-arm_app/MAINTAINERS
b/board/efi/efi-arm_app/MAINTAINERS
index 3114db69a35..3e2a85ab961 100644
--- a/board/efi/efi-arm_app/MAINTAINERS
+++ b/board/efi/efi-arm_app/MAINTAINERS
@@ -1,10 +1,3 @@
-EFI-ARM_APP32 BOARD
-M: Simon Glass <s...@chromium.org>
-S: Maintained
-F: board/efi/Kconfig
-F: board/efi/efi-arm_app/
-F: configs/efi-arm_app32_defconfig
-
EFI-ARM_APP64 BOARD
M: Simon Glass <s...@chromium.org>
S: Maintained
--
2.43.0
