On 3/19/25 1:04 PM, Paul Barker wrote:
For Ethernet to work on the RZ/G2L board, we need to enable support for the ksz9131 PHY and enable random MAC address generation (as no MAC address is programmed into the board).We also enable the `dhcp`, `mii` and `ping` commands so that Ethernet functionality can be tested and used to boot Linux. Signed-off-by: Paul Barker <paul.barker...@bp.renesas.com>
Reviewed-by: Marek Vasut <marek.vasut+rene...@mailbox.org>
