So far developers seem to use three popular boards: - Avaota A1: dev board with USB 3.0, dual Ethernet, small display - X96QPro+: TV box with Gigabit Ethernet, USB 3.0, eMMC - Radxa A5E: small dev board with USB3/M.2 2230 (muxed), dual Ethernet
Add the defconfig files for those boards, containing the DRAM parameters and the usual Kconfig options. Signed-off-by: Andre Przywara <andre.przyw...@arm.com> --- configs/avaota-a1_defconfig | 31 +++++++++++++++++++++++++++++++ configs/radxa-a5e_defconfig | 30 ++++++++++++++++++++++++++++++ configs/x96q_pro_plus_defconfig | 33 +++++++++++++++++++++++++++++++++ 3 files changed, 94 insertions(+) create mode 100644 configs/avaota-a1_defconfig create mode 100644 configs/radxa-a5e_defconfig create mode 100644 configs/x96q_pro_plus_defconfig diff --git a/configs/avaota-a1_defconfig b/configs/avaota-a1_defconfig new file mode 100644 index 00000000000..8721f2f5d1d --- /dev/null +++ b/configs/avaota-a1_defconfig @@ -0,0 +1,31 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun55i-t527-avaota-a1" +CONFIG_SPL=y +CONFIG_DRAM_SUNXI_DX_ODT=0x07070707 +CONFIG_DRAM_SUNXI_DX_DRI=0x0d0d0d0d +CONFIG_DRAM_SUNXI_CA_DRI=0x0e0e +CONFIG_DRAM_SUNXI_ODT_EN=0x84848484 +CONFIG_DRAM_SUNXI_TPR0=0x80808080 +CONFIG_DRAM_SUNXI_TPR1=0x06060606 +CONFIG_DRAM_SUNXI_TPR6=0x38000000 +CONFIG_DRAM_SUNXI_TPR10=0x802f3333 +CONFIG_DRAM_SUNXI_TPR11=0xc7c5c4c2 +CONFIG_DRAM_SUNXI_TPR12=0x3533302f +CONFIG_MACH_SUN55I_A523=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_R_I2C_ENABLE=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_REGULATOR_AXP=y +CONFIG_AXP717_POWER=y +CONFIG_AXP_I2C_ADDRESS=0x35 +CONFIG_AXP_DCDC2_VOLT=920 +CONFIG_AXP_DCDC3_VOLT=1160 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y diff --git a/configs/radxa-a5e_defconfig b/configs/radxa-a5e_defconfig new file mode 100644 index 00000000000..47c02fef7bd --- /dev/null +++ b/configs/radxa-a5e_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun55i-a527-radxa-a5e" +CONFIG_SPL=y +CONFIG_DRAM_SUNXI_DX_ODT=0x07070707 +CONFIG_DRAM_SUNXI_DX_DRI=0x0d0d0d0d +CONFIG_DRAM_SUNXI_CA_DRI=0x0e0e +CONFIG_DRAM_SUNXI_ODT_EN=0x84848484 +CONFIG_DRAM_SUNXI_TPR0=0x80808080 +CONFIG_DRAM_SUNXI_TPR1=0x06060606 +CONFIG_DRAM_SUNXI_TPR6=0x38000000 +CONFIG_DRAM_SUNXI_TPR10=0x802f3333 +CONFIG_DRAM_SUNXI_TPR11=0xc7c5c4c2 +CONFIG_DRAM_SUNXI_TPR12=0x3533302f +# BSP value: CONFIG_DRAM_SUNXI_TPR11=0xc6c4c2c0 +# BSP value: CONFIG_DRAM_SUNXI_TPR12=0x3a373233 +CONFIG_MACH_SUN55I_A523=y +CONFIG_R_I2C_ENABLE=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_REGULATOR_AXP=y +CONFIG_AXP717_POWER=y +CONFIG_AXP_DCDC2_VOLT=920 +CONFIG_AXP_DCDC3_VOLT=1100 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y diff --git a/configs/x96q_pro_plus_defconfig b/configs/x96q_pro_plus_defconfig new file mode 100644 index 00000000000..b6bb18860f9 --- /dev/null +++ b/configs/x96q_pro_plus_defconfig @@ -0,0 +1,33 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun55i-h728-x96qpro+" +CONFIG_SPL=y +CONFIG_DRAM_SUNXI_DX_ODT=0x07070707 +CONFIG_DRAM_SUNXI_DX_DRI=0x0c0c0c0c +CONFIG_DRAM_SUNXI_CA_DRI=0x0e0e +CONFIG_DRAM_SUNXI_ODT_EN=0x90909090 +CONFIG_DRAM_SUNXI_TPR0=0x80808080 +CONFIG_DRAM_SUNXI_TPR1=0x06060606 +CONFIG_DRAM_SUNXI_TPR6=0x3380807e +CONFIG_DRAM_SUNXI_TPR10=0x802f7788 +CONFIG_DRAM_SUNXI_TPR11=0x8f919190 +CONFIG_DRAM_SUNXI_TPR12=0x22222723 +CONFIG_MACH_SUN55I_A523=y +CONFIG_SUNXI_DRAM_A523_DDR3=y +CONFIG_DRAM_CLK=792 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_USB1_VBUS_PIN="PI12" +CONFIG_R_I2C_ENABLE=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_REGULATOR_AXP=y +CONFIG_AXP717_POWER=y +CONFIG_AXP_DCDC2_VOLT=920 +CONFIG_AXP_DCDC3_VOLT=1360 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y -- 2.46.3
