Add Kconfig options for MUX_MMIO so that it can be enabled
in SPL stage.
Signed-off-by: Anurag Dutta <a-du...@ti.com>
---
drivers/mux/Kconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
index f15ee4f833f..2b95eb02177 100644
--- a/drivers/mux/Kconfig
+++ b/drivers/mux/Kconfig
@@ -10,6 +10,16 @@ config MULTIPLEXER
if MULTIPLEXER
+config SPL_MUX_MMIO
+ bool "MMIO register bitfield-controlled Multiplexer"
+ depends on MULTIPLEXER && SYSCON
+ help
+ MMIO register bitfield-controlled Multiplexer controller.
+
+ The driver builds multiplexer controllers for bitfields in a syscon
+ register. For N bit wide bitfields, there will be 2^N possible
+ multiplexer states.
+
config MUX_MMIO
bool "MMIO register bitfield-controlled Multiplexer"
depends on MULTIPLEXER && SYSCON
--
2.34.1
