This series is the second effort of merging the Keymile boards support back into mainline.
This series is a subset of the first patch series: http://lists.denx.de/pipermail/u-boot/2011-April/090013.html The first large series was split up to three independent series, which are easier to review and apply for the custodians. This series adds the km_arm specific parts of the series. All its changes concern our marvell based boards and that's why it should go through the u-boot-marvell git tree. Changes for v3: taken Prafulla's comments into account Changes for v3 rebase: rebased on current u-boot-arm Holger Brunck (2): arm/km: add second serial interface for kirkwood arm/km: update mgcoge3un board support Valentin Longchamp (6): arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h arm/km: move CONFIG_EXTRA_ENV_SETTINGS from board to km_arm file arm/km: introduce bootcount env variable and clean km_arm arm/km: disable ls (through jffs2 support) arm/km: rename mgcoge2un to mgcoge3un mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE MAINTAINERS | 6 +- board/keymile/km_arm/km_arm.c | 108 +++++++++++---- board/keymile/km_arm/kwbimage-memphis.cfg | 197 ++++++++++++++++++++++++++ boards.cfg | 2 +- drivers/net/mvgbe.h | 2 + include/configs/km/keymile-common.h | 9 -- include/configs/km/km_arm.h | 25 ++++ include/configs/{mgcoge2un.h => mgcoge3un.h} | 49 ++++--- include/configs/suen3.h | 15 -- include/configs/suen8.h | 15 -- 10 files changed, 340 insertions(+), 88 deletions(-) create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg rename include/configs/{mgcoge2un.h => mgcoge3un.h} (56%) _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
