Falcon mode was disabled for TI_SECURE_DEVICE at commit e95b9b4437bc
("ti_armv7_common: Disable Falcon Mode on HS devices") for older 32-bit
HS devices and can be enabled on K3 devices.
For secure boot, the kernel with x509 headers can be packaged in a fit
container (fitImage) signed with TIFS keys for authentication.
We also set the default SPL_PAYLOAD_ARGS_ADDR which holds the DTB to
match ATF's K3_HW_CONFIG_BASE.
Signed-off-by: Anshul Dalal <ansh...@ti.com>
---
common/spl/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 21a5cefee7a..caa6c50c176 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1148,7 +1148,7 @@ config SPL_ONENAND_SUPPORT
config SPL_OS_BOOT
bool "Activate Falcon Mode"
- depends on !TI_SECURE_DEVICE
+ depends on !TI_SECURE_DEVICE || ARCH_K3
help
Enable booting directly to an OS from SPL.
for more info read doc/README.falcon
@@ -1156,6 +1156,7 @@ config SPL_OS_BOOT
config SPL_PAYLOAD_ARGS_ADDR
hex "Address in memory to load 'args' file for Falcon Mode to"
depends on SPL_OS_BOOT || SPL_LOAD_FIT_OPENSBI_OS_BOOT
+ default 0x82000000 if ARCH_K3
default 0x88000000 if ARCH_OMAP2PLUS
default 0x99000000 if ARCH_SC5XX && SC59X_64
default 0xA0000000 if ARCH_SC5XX && TARGET_SC594_SOM_EZKIT
--
2.43.0
