Dear Jan Pohanka, > I'm trying to get u-boot 2010.12 working on at91sam9260ek devkit with > mmc support. I have read several discussions here and followed the > steps described in README.atmel-mci. (my config and board file are > below...)
2010.12 is outdated. Use current top of tree. Besides I have a mmc enabled (and working) 9260ek port in my WIP branch that I will post soon. > There are two issues I'm facing. > > The first one: When I enable mmc support, the dataflash stops to work. > According to info from boot process, dataflash is detected correctly, > but no data can be read (environment) or written. Dataflash and MMC are mutually exclusive on the 9260ek. Only one should be enabled and used. > The second one: fatls command causes u-boot to freeze with following message You have to remove the CS jumper to the dataflash chip, otherwise you get contention between mmc and dataflash hardware. Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
